mariusz.pacek/voron2.4-config
1
0 Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

KlipperScreen.conf modified - 22.09.2026 - 18:17:34

Browse Source
This commit is contained in:
klipper committed 2026-09-22 18:17:53 +02:00
1 parent 311fb77694
commit 0af33761f4
17 files changed
-2122
Download Patch File Download Diff File Expand all files Collapse all files

No files matched your search

printer_data/config/KAMP_Settings.cfg
-36
View File
@@ -1,36 +0,0 @@
# Below you can include specific configuration files depending on what you want KAMP to do:
# [include ./KAMP/Adaptive_Meshing.cfg] # Include to enable adaptive meshing configuration.
[include ./KAMP/Line_Purge.cfg] # Include to enable adaptive line purging configuration.
#[include ./KAMP/Voron_Purge.cfg] # Include to enable adaptive Voron logo purging configuration.
# [include ./KAMP/Smart_Park.cfg] # Include to enable the Smart Park function, which parks the printhead near the print area for final heating.
[gcode_macro _KAMP_Settings]
description: This macro contains all adjustable settings for KAMP
# The following variables are settings for KAMP as a whole.
variable_verbose_enable: True # Set to True to enable KAMP information output when running. This is useful for debugging.
# The following variables are for adjusting adaptive mesh settings for KAMP.
variable_mesh_margin: 0 # Expands the mesh size in millimeters if desired. Leave at 0 to disable.
variable_fuzz_amount: 10 # Slightly randomizes mesh points to spread out wear from nozzle-based probes. Leave at 0 to disable.
# The following variables are for those with a dockable probe like Klicky, Euclid, etc. # ---------------- Attach Macro | Detach Macro
variable_probe_dock_enable: False # Set to True to enable the usage of a dockable probe. # ---------------------------------------------
variable_attach_macro: 'Attach_Probe' # The macro that is used to attach the probe. # Klicky Probe: 'Attach_Probe' | 'Dock_Probe'
variable_detach_macro: 'Dock_Probe' # The macro that is used to store the probe. # Euclid Probe: 'Deploy_Probe' | 'Stow_Probe'
# Legacy Gcode: 'M401' | 'M402'
# The following variables are for adjusting adaptive purge settings for KAMP.
variable_purge_height: 0.8 # Z position of nozzle during purge, default is 0.8.
variable_tip_distance: 0 # Distance between tip of filament and nozzle before purge. Should be similar to PRINT_END final retract amount.
variable_purge_margin: 10 # Distance the purge will be in front of the print area, default is 10.
variable_purge_amount: 30 # Amount of filament to be purged prior to printing.
variable_flow_rate: 12 # Flow rate of purge in mm3/s. Default is 12.
# The following variables are for adjusting the Smart Park feature for KAMP, which will park the printhead near the print area at a specified height.
variable_smart_park_height: 10 # Z position for Smart Park, default is 10.
gcode: # Gcode section left intentionally blank. Do not disturb.
{action_respond_info(" Running the KAMP_Settings macro does nothing, it is only used for storing KAMP settings. ")}
printer_data/config/KlipperScreen.conf
-32
View File
@@ -1,32 +0,0 @@
#~# --- Do not edit below this line. This section is auto generated --- #~#
#~#
#~# [main]
#~# theme = material-darker
#~# print_estimate_method = file
#~# screen_blanking = 300
#~# screen_blanking_printing = 300
#~# font_size = small
#~# confirm_estop = True
#~# show_heater_power = True
#~# move_speed_xy = 500
#~# move_speed_z = 30
#~# print_sort_dir = date_desc
#~# language = pl
#~#
#~# [displayed_macros Printer]
#~# clean_nozzle = False
#~# g32 = False
#~# line_purge = False
#~# nvmoff = False
#~# print_end = False
#~# park = False
#~# nvmon = False
#~# print_start = False
#~#
#~# [graph Printer]
#~# temperature_sensor raspberry_pi = False
#~# temperature_sensor mcu_temp = False
#~# temperature_sensor ebb_ntc = False
#~# extruder = False
#~#
printer_data/config/cartographer.cfg
-28
View File
@@ -1,28 +0,0 @@
[mcu cartographer]
canbus_uuid: fa54c42a161b
[cartographer]
mcu: cartographer
# Offsets are measured from the centre of your coil, to the tip of your nozzle
# on a level axis. It is vital that this is accurate.
x_offset: 0
# adjust for your cartographers offset from nozzle to middle of coil
y_offset: 25
# adjust for your cartographers offset from nozzle to middle of coil
[adxl345]
cs_pin: cartographer:PA3
spi_bus: spi1
[resonance_tester]
accel_chip: adxl345
probe_points:
125, 125, 20
[temperature_sensor Cartographer_MCU]
sensor_type: temperature_mcu
sensor_mcu: cartographer
min_temp: 0
max_temp: 105
printer_data/config/crowsnest.conf
-43
View File
@@ -1,43 +0,0 @@
#### crowsnest.conf
#### This is a typical default config.
#### Also used as default in mainsail / MainsailOS
#### See:
#### https://github.com/mainsail-crew/crowsnest/blob/master/README.md
#### for details to configure to your needs.
#####################################################################
#### #####
#### Information about ports and according URL's #####
#### #####
#####################################################################
#### #####
#### Port 8080 equals /webcam/?action=[stream/snapshot] #####
#### Port 8081 equals /webcam2/?action=[stream/snapshot] #####
#### Port 8082 equals /webcam3/?action=[stream/snapshot] #####
#### Port 8083 equals /webcam4/?action=[stream/snapshot] #####
#### #####
#####################################################################
[crowsnest]
log_path: ~/printer_data/logs/crowsnest.log
log_level: verbose
delete_log: true
[cam chamber]
mode: mjpg
port: 8080
device: /dev/v4l/by-id/usb-HZ_USB_Camera_20220301104-video-index0
resolution: 1280x720
max_fps: 30
[cam c930e]
mode: mjpg
port: 8081
device: /dev/v4l/by-id/usb-046d_Logitech_Webcam_C930e_CA4F3EDE-video-index0
resolution: 1280x720
max_fps: 30
# 50 Hz avoids mains-light flicker. Fixed focus prevents the autofocus from
# hunting when the toolhead crosses the centre of the frame.
v4l2ctl: power_line_frequency=1,exposure_dynamic_framerate=0,focus_automatic_continuous=0,focus_absolute=0
printer_data/config/ebb36.cfg
-63
View File
@@ -1,63 +0,0 @@
# Active toolhead controller: BIGTREETECH EBB with STM32G0B1xx (PCB revision not confirmed).
# Runtime transport: CAN on PB0/PB1 at 1,000,000 bit/s; application starts at 0x08000000.
# No Katapult bootloader was detected. Do not use an RP2040 image or assume remote CAN flashing.
# The EBB micro-controller controls the toolhead components.
# See docs/Config_Reference.md for a description of parameters.
[mcu EBBCan]
canbus_uuid: 2bfe734774a0
# ADXL345 is provided by Cartographer; legacy EBB accelerometer examples stay removed.
[extruder]
## Update value below when you perform extruder calibration
## If you ask for 100mm of filament, but in reality it is 98mm:
## rotation_distance = <previous_rotation_distance> * <actual_extrude_distance> / 100
rotation_distance: 21.778614
gear_ratio: 50:10
microsteps: 16
full_steps_per_rotation: 200 #200 for 1.8 degree, 400 for 0.9 degree
nozzle_diameter: 0.400
filament_diameter: 1.75
max_extrude_only_distance: 50
min_temp: 10
max_temp: 300
max_power: 1.0
min_extrude_temp: 170
# Use Klipper's safety default: 4 * nozzle_diameter^2 = 0.64 mm^2 for a 0.4 mm nozzle.
## Try to keep pressure_advance below 1.0
pressure_advance: 0.038
## Default is 0.040, leave stock
#pressure_advance_smooth_time: 0.040
step_pin: EBBCan: PD0
dir_pin: !EBBCan: PD1
enable_pin: !EBBCan: PD2
heater_pin: EBBCan: PB13
sensor_type: MAX31865
sensor_pin: EBBCan: PA4
spi_bus: spi1
rtd_nominal_r: 1000
rtd_reference_r: 4300
rtd_num_of_wires: 2
[tmc2209 extruder]
uart_pin: EBBCan: PA15
run_current: 0.650
stealthchop_threshold: 999999
[fan]
pin: EBBCan: PA1
kick_start_time: 0.5
hardware_pwm: false
cycle_time: 0.01
off_below: 0.1
[heater_fan hotend_fan]
pin: EBBCan: PA0
heater: extruder
heater_temp: 50.0
max_power: 1.0
kick_start_time: 0.5
printer_data/config/ebb36.cfg.bak-20260909-2252-wwbmg
-63
View File
@@ -1,63 +0,0 @@
# Active toolhead controller: BIGTREETECH EBB with STM32G0B1xx (PCB revision not confirmed).
# Runtime transport: CAN on PB0/PB1 at 1,000,000 bit/s; application starts at 0x08000000.
# No Katapult bootloader was detected. Do not use an RP2040 image or assume remote CAN flashing.
# The EBB micro-controller controls the toolhead components.
# See docs/Config_Reference.md for a description of parameters.
[mcu EBBCan]
canbus_uuid: 2bfe734774a0
# ADXL345 is provided by Cartographer; legacy EBB accelerometer examples stay removed.
[extruder]
## Update value below when you perform extruder calibration
## If you ask for 100mm of filament, but in reality it is 98mm:
## rotation_distance = <previous_rotation_distance> * <actual_extrude_distance> / 100
rotation_distance: 47.088
gear_ratio: 9:1
microsteps: 16
full_steps_per_rotation: 200 #200 for 1.8 degree, 400 for 0.9 degree
nozzle_diameter: 0.400
filament_diameter: 1.75
max_extrude_only_distance: 50
min_temp: 10
max_temp: 300
max_power: 1.0
min_extrude_temp: 170
# Use Klipper's safety default: 4 * nozzle_diameter^2 = 0.64 mm^2 for a 0.4 mm nozzle.
## Try to keep pressure_advance below 1.0
pressure_advance: 0.038
## Default is 0.040, leave stock
#pressure_advance_smooth_time: 0.040
step_pin: EBBCan: PD0
dir_pin: EBBCan: PD1
enable_pin: !EBBCan: PD2
heater_pin: EBBCan: PB13
sensor_type: MAX31865
sensor_pin: EBBCan: PA4
spi_bus: spi1
rtd_nominal_r: 1000
rtd_reference_r: 4300
rtd_num_of_wires: 2
[tmc2209 extruder]
uart_pin: EBBCan: PA15
run_current: 0.650
stealthchop_threshold: 999999
[fan]
pin: EBBCan: PA1
kick_start_time: 0.5
hardware_pwm: false
cycle_time: 0.01
off_below: 0.1
[heater_fan hotend_fan]
pin: EBBCan: PA0
heater: extruder
heater_temp: 50.0
max_power: 1.0
kick_start_time: 0.5
printer_data/config/ebb36.cfg.bak-20260909-extruder-direction
-63
View File
@@ -1,63 +0,0 @@
# Active toolhead controller: BIGTREETECH EBB with STM32G0B1xx (PCB revision not confirmed).
# Runtime transport: CAN on PB0/PB1 at 1,000,000 bit/s; application starts at 0x08000000.
# No Katapult bootloader was detected. Do not use an RP2040 image or assume remote CAN flashing.
# The EBB micro-controller controls the toolhead components.
# See docs/Config_Reference.md for a description of parameters.
[mcu EBBCan]
canbus_uuid: 2bfe734774a0
# ADXL345 is provided by Cartographer; legacy EBB accelerometer examples stay removed.
[extruder]
## Update value below when you perform extruder calibration
## If you ask for 100mm of filament, but in reality it is 98mm:
## rotation_distance = <previous_rotation_distance> * <actual_extrude_distance> / 100
rotation_distance: 22.6789511
gear_ratio: 50:10
microsteps: 16
full_steps_per_rotation: 200 #200 for 1.8 degree, 400 for 0.9 degree
nozzle_diameter: 0.400
filament_diameter: 1.75
max_extrude_only_distance: 50
min_temp: 10
max_temp: 300
max_power: 1.0
min_extrude_temp: 170
# Use Klipper's safety default: 4 * nozzle_diameter^2 = 0.64 mm^2 for a 0.4 mm nozzle.
## Try to keep pressure_advance below 1.0
pressure_advance: 0.038
## Default is 0.040, leave stock
#pressure_advance_smooth_time: 0.040
step_pin: EBBCan: PD0
dir_pin: EBBCan: PD1
enable_pin: !EBBCan: PD2
heater_pin: EBBCan: PB13
sensor_type: MAX31865
sensor_pin: EBBCan: PA4
spi_bus: spi1
rtd_nominal_r: 1000
rtd_reference_r: 4300
rtd_num_of_wires: 2
[tmc2209 extruder]
uart_pin: EBBCan: PA15
run_current: 0.650
stealthchop_threshold: 999999
[fan]
pin: EBBCan: PA1
kick_start_time: 0.5
hardware_pwm: false
cycle_time: 0.01
off_below: 0.1
[heater_fan hotend_fan]
pin: EBBCan: PA0
heater: extruder
heater_temp: 50.0
max_power: 1.0
kick_start_time: 0.5
printer_data/config/homing.cfg
-96
View File
@@ -1,96 +0,0 @@
# Note you may need to add the following to your printer.cfg somewhere (without the comments of course) for the Kinematic position stuff below to work.
#[force_move]
#enable_force_move: True
[gcode_macro _HOME_X]
gcode:
# Home
{% set RUN_CURRENT_X = printer.configfile.settings['tmc2209 stepper_x'].run_current|float %}
{% set RUN_CURRENT_Y = printer.configfile.settings['tmc2209 stepper_y'].run_current|float %}
{% set HOME_CURRENT = 0.49 %}
SET_TMC_CURRENT STEPPER=stepper_x CURRENT={HOME_CURRENT}
SET_TMC_CURRENT STEPPER=stepper_y CURRENT={HOME_CURRENT}
SET_KINEMATIC_POSITION X=15 SET_HOMED=X
G91
G1 X15 F1200
# Finish the release move, then let the TMC StallGuard flag clear.
M400
G4 P2000
G28 X
# Move away
G91
G1 X15 F1200
SET_TMC_CURRENT STEPPER=stepper_x CURRENT={RUN_CURRENT_X}
SET_TMC_CURRENT STEPPER=stepper_y CURRENT={RUN_CURRENT_Y}
[gcode_macro _HOME_Y]
gcode:
{% set RUN_CURRENT_X = printer.configfile.settings['tmc2209 stepper_x'].run_current|float %}
{% set RUN_CURRENT_Y = printer.configfile.settings['tmc2209 stepper_y'].run_current|float %}
{% set HOME_CURRENT = 0.49 %}
SET_TMC_CURRENT STEPPER=stepper_x CURRENT={HOME_CURRENT}
SET_TMC_CURRENT STEPPER=stepper_y CURRENT={HOME_CURRENT}
SET_KINEMATIC_POSITION Y=15 SET_HOMED=Y
G91
G1 Y-15 F1200
# Y uses the physical endstop on PG9; finish the release move first.
M400
# Home
G28 Y
# Move away
G91
G1 Y-15 F1200
# Restore normal CoreXY motor currents after moving off the endstop.
SET_TMC_CURRENT STEPPER=stepper_x CURRENT={RUN_CURRENT_X}
SET_TMC_CURRENT STEPPER=stepper_y CURRENT={RUN_CURRENT_Y}
[homing_override]
axes: xyz
gcode:
{% set homed_axes = printer.toolhead.homed_axes|lower %}
{% set home_all = 'X' not in params and 'Y' not in params and 'Z' not in params %}
{% set home_z = home_all or 'Z' in params %}
{% set home_x = home_all or 'X' in params or (home_z and 'x' not in homed_axes) %}
{% set home_y = home_all or 'Y' in params or (home_z and 'y' not in homed_axes) %}
{% set z_was_homed = 'z' in homed_axes %}
SAVE_GCODE_STATE NAME=HOMING_OVERRIDE_STATE
# Establish clearance before XY motion. If Z was not really homed, the
# temporary homed flag is explicitly cleared after an XY-only request.
{% if z_was_homed %}
{% set lift_z = [printer.toolhead.position.z|float + 5.0, printer.toolhead.axis_maximum.z|float]|min %}
G90
G1 Z{lift_z} F600
{% else %}
SET_KINEMATIC_POSITION Z=0 SET_HOMED=Z
G90
G1 Z5 F600
{% endif %}
{% if home_x %}
_HOME_X
{% endif %}
{% if home_y %}
_HOME_Y
{% endif %}
{% if home_z %}
G90
G1 X125 Y125 F15000
G28 Z
G1 Z10 F1500
{% elif not z_was_homed %}
SET_KINEMATIC_POSITION SET_HOMED= CLEAR_HOMED=Z
{% endif %}
RESTORE_GCODE_STATE NAME=HOMING_OVERRIDE_STATE MOVE=0
printer_data/config/inputShaper.cfg
-16
View File
@@ -1,16 +0,0 @@
[mcu adxl]
# Change <mySerial> to whatever you found above. For example,
# usb-Klipper_rp2040_E661640843545B2E-if00
serial: /dev/serial/by-id/usb-Klipper_rp2040_E6625495535A5232-if00
[adxl345]
cs_pin: adxl:gpio9
spi_software_sclk_pin: adxl:gpio10
spi_software_mosi_pin: adxl:gpio11
spi_software_miso_pin: adxl:gpio12
axes_map: x,-z,y
[resonance_tester]
accel_chip: adxl345
probe_points:
125, 125, 20
printer_data/config/moonraker.conf
-100
View File
@@ -1,100 +0,0 @@
[server]
host: 0.0.0.0
port: 7125
klippy_uds_address: /home/biqu/printer_data/comms/klippy.sock
[authorization]
trusted_clients:
10.0.0.0/8
127.0.0.0/8
169.254.0.0/16
172.16.0.0/12
192.168.0.0/16
FE80::/10
::1/128
cors_domains:
*.lan
*.local
*://localhost
*://localhost:*
*://my.mainsail.xyz
*://app.fluidd.xyz
[octoprint_compat]
[history]
[update_manager]
channel: dev
refresh_interval: 168
[update_manager mainsail-config]
type: git_repo
primary_branch: master
path: ~/mainsail-config
origin: https://github.com/mainsail-crew/mainsail-config.git
managed_services: klipper
[update_manager mainsail]
type: web
channel: stable
repo: mainsail-crew/mainsail
path: ~/mainsail
[update_manager crowsnest]
type: git_repo
path: ~/crowsnest
origin: https://github.com/mainsail-crew/crowsnest.git
install_script: tools/install.sh
# Sonar update_manager entry
[update_manager sonar]
type: git_repo
path: ~/sonar
origin: https://github.com/mainsail-crew/sonar.git
primary_branch: main
managed_services: sonar
install_script: tools/install.sh
[update_manager timelapse]
type: git_repo
primary_branch: main
path: ~/moonraker-timelapse
origin: https://github.com/mainsail-crew/moonraker-timelapse.git
managed_services: klipper moonraker
[update_manager KlipperScreen]
type: git_repo
path: ~/KlipperScreen
origin: https://github.com/jordanruthe/KlipperScreen.git
virtualenv: ~/.KlipperScreen-env
requirements: scripts/KlipperScreen-requirements.txt
install_script: scripts/KlipperScreen-install.sh
managed_services: KlipperScreen
[update_manager klipper_tmc_autotune]
type: git_repo
channel: dev
path: ~/klipper_tmc_autotune
origin: https://github.com/andrewmcgr/klipper_tmc_autotune.git
managed_services: klipper
primary_branch: main
install_script: install.sh
[update_manager cartographer_plugin]
type: python
channel: stable
virtualenv: ~/klippy-env
project_name: cartographer3d-plugin
is_system_service: False
managed_services: klipper
info_tags: desc=Cartographer Plugin
[file_manager]
enable_object_processing: True
[update_manager klipper-backup]
type: git_repo
path: ~/klipper-backup
origin: https://github.com/Staubgeborener/klipper-backup.git
managed_services: moonraker
primary_branch: main
printer_data/config/motorsCalibrate.cfg
-17
View File
@@ -1,17 +0,0 @@
[autotune_tmc stepper_x]
motor: moons-ms17hd6p4200
sg4_thrs: 150
[autotune_tmc stepper_y]
motor: moons-ms17hd6p4200
[autotune_tmc stepper_z]
motor: moons-ms17hd6p4200
[autotune_tmc stepper_z1]
motor: moons-ms17hd6p4200
[autotune_tmc stepper_z2]
motor: moons-ms17hd6p4200
[autotune_tmc stepper_z3]
motor: moons-ms17hd6p4200
[autotune_tmc extruder]
motor: ldo-36sth20-1004ahg
printer_data/config/pre-fix-20260907-1955/crowsnest.conf
-55
View File
@@ -1,55 +0,0 @@
#### crowsnest.conf
#### This is a typical default config.
#### Also used as default in mainsail / MainsailOS
#### See:
#### https://github.com/mainsail-crew/crowsnest/blob/master/README.md
#### for details to configure to your needs.
#####################################################################
#### #####
#### Information about ports and according URL's #####
#### #####
#####################################################################
#### #####
#### Port 8080 equals /webcam/?action=[stream/snapshot] #####
#### Port 8081 equals /webcam2/?action=[stream/snapshot] #####
#### Port 8082 equals /webcam3/?action=[stream/snapshot] #####
#### Port 8083 equals /webcam4/?action=[stream/snapshot] #####
#### #####
#####################################################################
[crowsnest]
log_path: ~/printer_data/logs/crowsnest.log
log_level: verbose # Valid Options are quiet/verbose/debug
delete_log: false # Deletes log on every restart, if set to true
[cam android]
mode: mjpg # mjpg/rtsp
port: 80 # Port
device: http://192.168.0.117:4747/video # See Log for available ...
resolution: 640x480 # widthxheight format
max_fps: 15 # If Hardware Supports this it will be forced, otherwise ignored/coerced.
#custom_flags: # You can run the Stream Services with custom flags.
#v4l2ctl: # Add v4l2-ctl parameters to setup your camera, see Log what your cam is capable of.
[cam c930]
mode: mjpg # mjpg/rtsp
port: 8080 # Port
device: /dev/video0 # See Log for available ...
resolution: 1280x720 # widthxheight format
max_fps: 30 # If Hardware Supports this it will be forced, otherwise ignored/coerced.
#custom_flags: # You can run the Stream Services with custom flags.
#v4l2ctl: # Add v4l2-ctl parameters to setup your camera, see Log what your cam is capable of.
[cam custom]
mode: mjpg # mjpg/rtsp
port: 8081 # Port
device: /dev/video2 # See Log for available ...
resolution: 1280x720 # widthxheight format
max_fps: 30 # If Hardware Supports this it will be forced, otherwise ignored/coerced.
#custom_flags: # You can run the Stream Services with custom flags.
#v4l2ctl: # Add v4l2-ctl parameters to setup your camera, see Log what your cam is capable of.
printer_data/config/pre-fix-20260907-1955/crowsnest.conf.before-camera-tuning
-41
View File
@@ -1,41 +0,0 @@
#### crowsnest.conf
#### This is a typical default config.
#### Also used as default in mainsail / MainsailOS
#### See:
#### https://github.com/mainsail-crew/crowsnest/blob/master/README.md
#### for details to configure to your needs.
#####################################################################
#### #####
#### Information about ports and according URL's #####
#### #####
#####################################################################
#### #####
#### Port 8080 equals /webcam/?action=[stream/snapshot] #####
#### Port 8081 equals /webcam2/?action=[stream/snapshot] #####
#### Port 8082 equals /webcam3/?action=[stream/snapshot] #####
#### Port 8083 equals /webcam4/?action=[stream/snapshot] #####
#### #####
#####################################################################
[crowsnest]
log_path: ~/printer_data/logs/crowsnest.log
log_level: verbose
delete_log: true
[cam chamber]
mode: mjpg
port: 8080
device: /dev/v4l/by-id/usb-HZ_USB_Camera_20220301104-video-index0
resolution: 1280x720
max_fps: 30
[cam c930e]
mode: mjpg
port: 8081
device: /dev/v4l/by-id/usb-046d_Logitech_Webcam_C930e_CA4F3EDE-video-index0
resolution: 1280x720
max_fps: 30
printer_data/config/pre-fix-20260907-1955/homing.cfg
-103
View File
@@ -1,103 +0,0 @@
# Note you may need to add the following to your printer.cfg somewhere (without the comments of course) for the Kinematic position stuff below to work.
#[force_move]
#enable_force_move: True
[gcode_macro _HOME_X]
gcode:
# Home
{% set RUN_CURRENT_X = printer.configfile.settings['tmc2209 stepper_x'].run_current|float %}
{% set RUN_CURRENT_Y = printer.configfile.settings['tmc2209 stepper_y'].run_current|float %}
{% set HOME_CURRENT = 0.49 %}
SET_TMC_CURRENT STEPPER=stepper_x CURRENT={HOME_CURRENT}
SET_TMC_CURRENT STEPPER=stepper_y CURRENT={HOME_CURRENT}
SET_KINEMATIC_POSITION X=15 SET_HOMED=X
G91
G1 X15 F1200
# Finish the release move, then let the TMC StallGuard flag clear.
M400
G4 P2000
G28 X
# Move away
G91
G1 X15 F1200
SET_TMC_CURRENT STEPPER=stepper_x CURRENT={RUN_CURRENT_X}
SET_TMC_CURRENT STEPPER=stepper_y CURRENT={RUN_CURRENT_Y}
[gcode_macro _HOME_Y]
gcode:
{% set RUN_CURRENT_X = printer.configfile.settings['tmc2209 stepper_x'].run_current|float %}
{% set RUN_CURRENT_Y = printer.configfile.settings['tmc2209 stepper_y'].run_current|float %}
{% set HOME_CURRENT = 0.49 %}
SET_TMC_CURRENT STEPPER=stepper_x CURRENT={HOME_CURRENT}
SET_TMC_CURRENT STEPPER=stepper_y CURRENT={HOME_CURRENT}
SET_KINEMATIC_POSITION Y=15 SET_HOMED=Y
G91
G1 Y-15 F1200
# Y uses the physical endstop on PG9; finish the release move first.
M400
# Home
G28 Y
# Move away
G91
G1 Y-15 F1200
# Restore normal CoreXY motor currents after moving off the endstop.
SET_TMC_CURRENT STEPPER=stepper_x CURRENT={RUN_CURRENT_X}
SET_TMC_CURRENT STEPPER=stepper_y CURRENT={RUN_CURRENT_Y}
[homing_override]
axes: xyz
gcode:
{% set homed_axes = printer.toolhead.homed_axes|lower %}
{% set home_all = 'X' not in params and 'Y' not in params and 'Z' not in params %}
{% set home_z = home_all or 'Z' in params %}
{% set home_x = home_all or 'X' in params or (home_z and 'x' not in homed_axes) %}
{% set home_y = home_all or 'Y' in params or (home_z and 'y' not in homed_axes) %}
{% set z_was_homed = 'z' in homed_axes %}
SAVE_GCODE_STATE NAME=HOMING_OVERRIDE_STATE
# Establish clearance before XY motion. If Z was not really homed, the
# temporary homed flag is explicitly cleared after an XY-only request.
{% if z_was_homed %}
{% set lift_z = [printer.toolhead.position.z|float + 5.0, printer.toolhead.axis_maximum.z|float]|min %}
G90
G1 Z{lift_z} F600
{% else %}
SET_KINEMATIC_POSITION Z=0 SET_HOMED=Z
G90
G1 Z5 F600
{% endif %}
{% if home_x %}
_HOME_X
{% endif %}
{% if home_y %}
_HOME_Y
{% endif %}
{% if home_z %}
G90
G1 X125 Y125 F15000
G28 Z
G1 Z10 F1500
{% elif not z_was_homed %}
SET_KINEMATIC_POSITION SET_HOMED= CLEAR_HOMED=Z
{% endif %}
RESTORE_GCODE_STATE NAME=HOMING_OVERRIDE_STATE MOVE=0
[gcode_macro _CG28]
description: Homing only if necessary
gcode:
{% if "xyz" not in printer.toolhead.homed_axes %}
G28
{% endif %}
printer_data/config/pre-fix-20260907-1955/moonraker.conf
-108
View File
@@ -1,108 +0,0 @@
[server]
host: 0.0.0.0
port: 7125
klippy_uds_address: /home/biqu/printer_data/comms/klippy.sock
[authorization]
trusted_clients:
10.0.0.0/8
127.0.0.0/8
169.254.0.0/16
172.16.0.0/12
192.168.0.0/16
FE80::/10
::1/128
cors_domains:
*.lan
*.local
*://localhost
*://localhost:*
*://my.mainsail.xyz
*://app.fluidd.xyz
[octoprint_compat]
[history]
[update_manager]
channel: dev
refresh_interval: 168
[update_manager mainsail-config]
type: git_repo
primary_branch: master
path: ~/mainsail-config
origin: https://github.com/mainsail-crew/mainsail-config.git
managed_services: klipper
[update_manager mainsail]
type: web
channel: stable
repo: mainsail-crew/mainsail
path: ~/mainsail
[update_manager crowsnest]
type: git_repo
path: ~/crowsnest
origin: https://github.com/mainsail-crew/crowsnest.git
install_script: tools/install.sh
# Sonar update_manager entry
[update_manager sonar]
type: git_repo
path: ~/sonar
origin: https://github.com/mainsail-crew/sonar.git
primary_branch: main
managed_services: sonar
install_script: tools/install.sh
[update_manager timelapse]
type: git_repo
primary_branch: main
path: ~/moonraker-timelapse
origin: https://github.com/mainsail-crew/moonraker-timelapse.git
managed_services: klipper moonraker
[update_manager KlipperScreen]
type: git_repo
path: ~/KlipperScreen
origin: https://github.com/jordanruthe/KlipperScreen.git
virtualenv: ~/.KlipperScreen-env
requirements: scripts/KlipperScreen-requirements.txt
install_script: scripts/KlipperScreen-install.sh
managed_services: KlipperScreen
[update_manager Klipper-Adaptive-Meshing-Purging]
type: git_repo
channel: dev
path: ~/Klipper-Adaptive-Meshing-Purging
origin: https://github.com/kyleisah/Klipper-Adaptive-Meshing-Purging.git
managed_services: klipper
primary_branch: main
[update_manager klipper_tmc_autotune]
type: git_repo
channel: dev
path: ~/klipper_tmc_autotune
origin: https://github.com/andrewmcgr/klipper_tmc_autotune.git
managed_services: klipper
primary_branch: main
install_script: install.sh
[update_manager cartographer_plugin]
type: python
channel: stable
virtualenv: ~/klippy-env
project_name: cartographer3d-plugin
is_system_service: False
managed_services: klipper
info_tags: desc=Cartographer Plugin
[file_manager]
enable_object_processing: True
[update_manager klipper-backup]
type: git_repo
path: ~/klipper-backup
origin: https://github.com/Staubgeborener/klipper-backup.git
managed_services: moonraker
primary_branch: main
printer_data/config/pre-fix-20260907-1955/printer.cfg
-979
View File
@@ -1,979 +0,0 @@
# Active mainboard: BigTreeTech Octopus family with STM32F407xx (PCB revision not confirmed).
# Firmware profile: 32KiB factory SD bootloader, 8MHz crystal, USB on PA11/PA12.
# Do not substitute the STM32F446/12MHz profile; runtime hardware was verified on 2026-09-06.
# after running "make", copy the generated "klipper/out/klipper.bin" file to a
# file named "firmware.bin" on an SD card and then restart the Octopus with that SD card.
# See docs/Config_Reference.md for a description of parameters.
## Voron Design VORON2 250mm; BigTreeTech Octopus-family STM32F407; TMC2209 UART.
## *** THINGS TO CHANGE/CHECK: ***
## MCU paths [mcu] section
## Thermistor types [extruder] and [heater_bed] sections - See https://www.klipper3d.org/Config_Reference.html#common-thermistors for common thermistor types
## Hotend heater pin [extruder] section
## Z Endstop Switch location [safe_z_home] section
## Homing end position [gcode_macro G32] section
## Z Endstop Switch offset for Z0 [stepper_z] section
## Stepper Z1 enable pin [stepper_z1] section
## Probe points [quad_gantry_level] section
## Min & Max gantry corner postions [quad_gantry_level] section
## PID tune [extruder] and [heater_bed] sections
## Probe pin [probe] section
## Fine tune E steps [extruder] section
[include stealthburner_leds.cfg]
[include KAMP_Settings.cfg]
#[include inputShaper.cfg]
[include motorsCalibrate.cfg]
[include cartographer.cfg]
[include ebb36.cfg]
[include homing.cfg]
[exclude_object]
[force_move]
enable_force_move: true
[mcu]
## Obtain definition by "ls -l /dev/serial/by-id/" then unplug to verify
##--------------------------------------------------------------------
serial: /dev/serial/by-id/usb-Klipper_stm32f407xx_2B0024001150304235343520-if00
restart_method: command
##--------------------------------------------------------------------
[printer]
kinematics: corexy
max_velocity: 750
max_accel: 12000 #Max 4000
max_z_velocity: 30 #Max 15 for 12V TMC Drivers, can increase for 24V
max_z_accel: 350
square_corner_velocity: 5.0
[input_shaper]
#shaper_freq_x: 58.8
#shaper_type_x: mzv
#shaper_freq_y: 52.6
#shaper_type_y: mzv
#####################################################################
# X/Y Stepper Settings
#####################################################################
## B Stepper - Left
## Connected to MOTOR_0
## Endstop connected to DIAG_0
[stepper_x]
step_pin: PF13
dir_pin: PF12
enable_pin: !PF14
rotation_distance: 40
microsteps: 32
full_steps_per_rotation:200 #set to 400 for 0.9 degree stepper
endstop_pin: tmc2209_stepper_x:virtual_endstop
position_min: 0
##--------------------------------------------------------------------
##Uncomment below for 250mm build
position_endstop: 0
position_max: 254
## Uncomment for 300mm build
#position_endstop: 300
#position_max: 300
## Uncomment for 350mm build
#position_endstop: 350
#position_max: 350
##--------------------------------------------------------------------
homing_speed: 80 #Max 100
homing_retract_dist: 0
homing_positive_dir: false
## Make sure to update below for your relevant driver (2208 or 2209)
[tmc2209 stepper_x]
diag_pin: ^PG6
uart_pin: PC4
interpolate: true
run_current: 1.4
sense_resistor: 0.110
driver_SGTHRS: 150
## A Stepper - Right
## Connected to MOTOR_1
## Endstop connected to DIAG_1
[stepper_y]
step_pin: PG0
dir_pin: PG1
enable_pin: !PF15
rotation_distance: 40
microsteps: 32
full_steps_per_rotation:200 #set to 400 for 0.9 degree stepper
endstop_pin: PG9
position_min: 0
##--------------------------------------------------------------------
## Uncomment for 250mm build
position_endstop: 253
position_max: 253
## Uncomment for 300mm build
#position_endstop: 300
#position_max: 300
## Uncomment for 350mm build
#position_endstop: 350
#position_max: 350
##--------------------------------------------------------------------
homing_speed: 100 #Max 100
homing_retract_dist: 0
homing_positive_dir: true
## Make sure to update below for your relevant driver (2208 or 2209)
[tmc2209 stepper_y]
uart_pin: PD11
interpolate: true
run_current: 1.4
sense_resistor: 0.110
stealthchop_threshold: 0
#####################################################################
# Z Stepper Settings
#####################################################################
## Z0 Stepper - Front Left
## Connected to MOTOR_2
## Endstop connected to DIAG_2
[stepper_z]
step_pin: PF11
dir_pin: PG3
enable_pin: !PG5
rotation_distance: 40
gear_ratio: 80:16
microsteps: 32
endstop_pin: probe:z_virtual_endstop
## Z-position of nozzle (in mm) to z-endstop trigger point relative to print surface (Z0)
## (+) value = endstop above Z0, (-) value = endstop below
## Increasing position_endstop brings nozzle closer to the bed
## After you run Z_ENDSTOP_CALIBRATE, position_endstop will be stored at the very end of your config
# position_endstop: -0.5
##--------------------------------------------------------------------
## Uncomment below for 250mm build
position_max: 230
## Uncomment below for 300mm build
#position_max: 260
## Uncomment below for 350mm build
#position_max: 310
##--------------------------------------------------------------------
position_min: -1
homing_speed: 100
second_homing_speed: 2
homing_retract_dist: 0
## Make sure to update below for your relevant driver (2208 or 2209)
[tmc2209 stepper_z]
uart_pin: PC6
interpolate: true
run_current: 1.4
sense_resistor: 0.110
## Z1 Stepper - Rear Left
## Connected to MOTOR_3
[stepper_z1]
step_pin: PG4
dir_pin: !PC1
## Octopus 1.0 & 1.1. Octopus PRO 1.0
enable_pin: !PA0
## Octopus PRO 1.1
#enable_pin: !PA2
rotation_distance: 40
gear_ratio: 80:16
microsteps: 32
## Make sure to update below for your relevant driver (2208 or 2209)
[tmc2209 stepper_z1]
uart_pin: PC7
interpolate: true
run_current: 1.4
sense_resistor: 0.110
## Z2 Stepper - Rear Right
## Connected to MOTOR_4
[stepper_z2]
step_pin: PF9
dir_pin: PF10
enable_pin: !PG2
rotation_distance: 40
gear_ratio: 80:16
microsteps: 32
## Make sure to update below for your relevant driver (2208 or 2209)
[tmc2209 stepper_z2]
uart_pin: PF2
interpolate: true
run_current: 1.4
sense_resistor: 0.110
## Z3 Stepper - Front Right
## Connected to MOTOR_5
[stepper_z3]
step_pin: PC13
dir_pin: !PF0
enable_pin: !PF1
rotation_distance: 40
gear_ratio: 80:16
microsteps: 32
## Make sure to update below for your relevant driver (2208 or 2209)
[tmc2209 stepper_z3]
uart_pin: PE4
interpolate: true
run_current:1.4
sense_resistor: 0.110
[filament_switch_sensor switch_sensor]
switch_pin: ^PG12
pause_on_runout: True
runout_gcode:
PAUSE # [pause_resume] is required in printer.cfg
M117 Filament switch runout
insert_gcode:
M117 Filament switch inserted
[filament_motion_sensor encoder_sensor]
switch_pin: ^PG13
detection_length: 4.5 # accuracy of motion sensor 2.88mm
extruder: extruder
pause_on_runout: False
runout_gcode:
PAUSE # [pause_resume] is required in printer.cfg
M117 Filament encoder runout
insert_gcode:
M117 Filament encoder inserted
#####################################################################
# Bed Heater
#####################################################################
## SSR Pin - HE1
## Thermistor - TB
[heater_bed]
## Uncomment the following line if using the default SSR wiring from the docs site
heater_pin: PA3
## Other wiring guides may use BED_OUT to control the SSR. Uncomment the following line for those cases
#heater_pin: PA1
## Check what thermistor type you have. See https://www.klipper3d.org/Config_Reference.html#common-thermistors for common thermistor types.
## Use "Generic 3950" for Keenovo heaters
sensor_type: Generic 3950
sensor_pin: PF3
## Adjust max_power so it doesn't exceed the SSR rating. The Omron G3NA-210B-DC5 SSR is rated at 4 amps without a heatsink.
## The formula is "4 / (Wattage_of_bed_heater / Mains_voltage) = max_power"
## If max_power is greater than 1.0, use 1.0
max_power: 0.8
min_temp: 0
max_temp: 120
control: pid
pid_kp: 58.437
pid_ki: 2.347
pid_kd: 363.769
[bed_mesh]
zero_reference_position: 125, 125 # center of your bed
speed: 400
horizontal_move_z: 5
mesh_min: 35, 30
mesh_max: 215, 200
probe_count: 30,30
algorithm: bicubic
adaptive_margin: 5
#####################################################################
# Fan Control
#####################################################################
## Print Cooling Fan - FAN0
# [fan]
# pin: PA8
# kick_start_time: 0.5
# ## Depending on your fan, you may need to increase this value
# ## if your fan will not start. Can change cycle_time (increase)
# ## if your fan is not able to slow down effectively
# off_below: 0.10
## Hotend Fan - FAN1
# [heater_fan hotend_fan]
# pin: PE5
# max_power: 1.0
# kick_start_time: 0.5
# heater: extruder
# heater_temp: 50.0
## If you are experiencing back flow, you can reduce fan_speed
#fan_speed: 1.0
## Controller fan - FAN2
[controller_fan controller_fan_1]
pin: PD12
kick_start_time: 0.5
idle_speed: 0.6
max_power: 1
heater: heater_bed
[fan_generic front]
pin: PE5
[temperature_fan ebb36_fan]
pin: PD14
sensor_type: temperature_mcu
sensor_mcu: EBBCan
control: pid
pid_Kp: 2.0
pid_Ki: 5.0
pid_Kd: 0.5
pid_deriv_time: 2.0
# target_temp: 50.0
min_temp: 0.0
max_temp: 90.0
min_speed: 0.0
max_speed: 1.0
kick_start_time: 0.1
cycle_time: 0.001
shutdown_speed: 0.0
gcode_id: C
[temperature_sensor raspberry_pi]
sensor_type: temperature_host
max_temp: 100
[temperature_sensor mcu_temp]
sensor_type: temperature_mcu
max_temp: 100
[fan_generic nevermore]
## Nevermore - FAN5 on Octopus
## Adjust if you use a different board or a different terminal.
pin: PD13
#####################################################################
# Homing and Gantry Adjustment Routines
#####################################################################
[idle_timeout]
timeout: 1800
# [safe_z_home]
# ## XY Location of the Z Endstop Switch
# ## Update -10,-10 to the XY coordinates of your endstop pin
# ## (such as 157,305) after going through Z Endstop Pin
# ## Location Definition step.
# home_xy_position: 125, 125
# speed:100
# z_hop:10
# Use QUAD_GANTRY_LEVEL to level a gantry.
# Min & Max gantry corners - measure from nozzle at MIN (0,0) and
# MAX (250, 250), (300,300), or (350,350) depending on your printer size
# to respective belt positions
[quad_gantry_level]
#--------------------------------------------------------------------
## Gantry Corners for 250mm Build
## Uncomment for 250mm build
gantry_corners:
-60,-10
310, 320
## Probe points
points:
50,25
50,210
220,210
220,25
## Gantry Corners for 300mm Build
## Uncomment for 300mm build
#gantry_corners:
# -60,-10
# 360,370
## Probe points
#points:
# 50,25
# 50,225
# 250,225
# 250,25
## Gantry Corners for 350mm Build
## Uncomment for 350mm build
#gantry_corners:
# -60,-10
# 410,420
## Probe points
#points:
# 50,25
# 50,275
# 300,275
# 300,25
#--------------------------------------------------------------------
speed: 300
horizontal_move_z: 10
retries: 5
retry_tolerance: 0.0075
max_adjust: 10
########################################
# EXP1 / EXP2 (display) pins
########################################
[board_pins]
aliases:
# EXP1 header
EXP1_1=PE8, EXP1_2=PE7,
EXP1_3=PE9, EXP1_4=PE10,
EXP1_5=PE12, EXP1_6=PE13, # Slot in the socket on this side
EXP1_7=PE14, EXP1_8=PE15,
EXP1_9=<GND>, EXP1_10=<5V>,
# EXP2 header
EXP2_1=PA6, EXP2_2=PA5,
EXP2_3=PB1, EXP2_4=PA4,
EXP2_5=PB2, EXP2_6=PA7, # Slot in the socket on this side
EXP2_7=PC15, EXP2_8=<RST>,
EXP2_9=<GND>, EXP2_10=<5V>
#####################################################################
# Displays
#####################################################################
## Uncomment the display that you have
#--------------------------------------------------------------------
## RepRapDiscount 128x64 Full Graphic Smart Controller
#[display]
#lcd_type: st7920
#cs_pin: EXP1_4
#sclk_pin: EXP1_5
#sid_pin: EXP1_3
#menu_timeout: 40
#encoder_pins: ^EXP2_5, ^EXP2_3
#click_pin: ^!EXP1_2
#[output_pin beeper]
#pin: EXP1_1
#--------------------------------------------------------------------
## mini12864 LCD Display
#[display]
#lcd_type: uc1701
#cs_pin: EXP1_3
#a0_pin: EXP1_4
#rst_pin: EXP1_5
#encoder_pins: ^EXP2_5, ^EXP2_3
#click_pin: ^!EXP1_2
#contrast: 63
#spi_software_miso_pin: EXP2_1
#spi_software_mosi_pin: EXP2_6
#spi_software_sclk_pin: EXP2_2
## To control Neopixel RGB in mini12864 display
#[neopixel btt_mini12864]
#pin: EXP1_6
#chain_count: 3
#initial_RED: 0.1
#initial_GREEN: 0.5
#initial_BLUE: 0.0
#color_order: RGB
## Set RGB values on boot up for each Neopixel.
## Index 1 = display, Index 2 and 3 = Knob
#[delayed_gcode setdisplayneopixel]
#initial_duration: 1
#gcode:
# SET_LED LED=btt_mini12864 RED=1 GREEN=1 BLUE=1 INDEX=1 TRANSMIT=0
# SET_LED LED=btt_mini12864 RED=1 GREEN=0 BLUE=0 INDEX=2 TRANSMIT=0
# SET_LED LED=btt_mini12864 RED=1 GREEN=0 BLUE=0 INDEX=3
#--------------------------------------------------------------------
[virtual_sdcard]
path: ~/printer_data/gcodes
[display_status]
[pause_resume]
#####################################################################
# Macros
#####################################################################
[gcode_macro LOAD_FILAMENT]
variable_load_distance: 50
variable_purge_distance: 25
gcode:
{% set speed = params.SPEED|default(300) %}
{% set max_velocity = printer.configfile.settings['extruder'].max_extrude_only_velocity * 60 %}
SAVE_GCODE_STATE NAME=load_state
G91
G92 E0
G1 E{load_distance} F{max_velocity} # fast-load
G1 E{purge_distance} F{speed} # purge
RESTORE_GCODE_STATE NAME=load_state
[gcode_macro UNLOAD_FILAMENT]
variable_unload_distance: 50
variable_purge_distance: 25
gcode:
{% set speed = params.SPEED|default(300) %}
{% set max_velocity = printer.configfile.settings['extruder'].max_extrude_only_velocity * 60 %}
SAVE_GCODE_STATE NAME=unload_state
G91
G92 E0
G1 E{purge_distance} F{speed} # purge
G1 E-{unload_distance} F{max_velocity} # fast-unload
RESTORE_GCODE_STATE NAME=unload_state
[gcode_macro start_heating]
description: Home, lift the toolhead, then manually preheat; use STOP_HEATING to finish
gcode:
{% set bed = params.BED|default(115)|float %}
{% set hotend = params.HOTEND|default(50)|float %}
{% set lift = params.LIFT|default(50)|float %}
{% set front = params.FRONT|default(0.55)|float %}
{% set filter = params.FILTER|default(1.0)|float %}
{% set part = params.PART|default(0.31)|float %}
{% set timeout = params.TIMEOUT|default(printer.configfile.settings.idle_timeout.timeout)|int %}
{% set bed_max = printer.configfile.settings.heater_bed.max_temp|float %}
{% set hotend_max = printer.configfile.settings.extruder.max_temp|float %}
{% set print_state = printer.print_stats.state|string|lower %}
{% if print_state in ["printing", "paused"] %}
{ action_raise_error("START_HEATING is only for manual preheat while no print is active") }
{% elif bed < 0 or bed >= bed_max %}
{ action_raise_error("BED must be at least 0 and below %.0f C" % (bed_max)) }
{% elif hotend < 0 or hotend >= hotend_max %}
{ action_raise_error("HOTEND must be at least 0 and below %.0f C" % (hotend_max)) }
{% elif lift < printer.toolhead.axis_minimum.z|float or lift > printer.toolhead.axis_maximum.z|float %}
{ action_raise_error("LIFT is outside the configured Z travel") }
{% elif front < 0 or front > 1 or filter < 0 or filter > 1 or part < 0 or part > 1 %}
{ action_raise_error("FRONT, FILTER and PART must be between 0.0 and 1.0") }
{% elif timeout < 300 or timeout > 7200 %}
{ action_raise_error("TIMEOUT must be between 300 and 7200 seconds") }
{% else %}
SAVE_GCODE_STATE NAME=START_HEATING_STATE
STATUS_HOMING
{% if "xyz" not in printer.toolhead.homed_axes %}
G28
{% endif %}
G90
G0 Z{lift} F900
STATUS_HEATING
SET_IDLE_TIMEOUT TIMEOUT={timeout}
SET_HEATER_TEMPERATURE HEATER=heater_bed TARGET={bed}
SET_HEATER_TEMPERATURE HEATER=extruder TARGET={hotend}
SET_FAN_SPEED FAN=nevermore SPEED={filter}
SET_FAN_SPEED FAN=front SPEED={front}
M106 S{(part * 255)|int}
RESTORE_GCODE_STATE NAME=START_HEATING_STATE MOVE=0
{ action_respond_info("Manual preheat: Z %.1f mm, bed %.0f C, hotend %.0f C, timeout %d min. No chamber sensor is configured." % (lift, bed, hotend, timeout // 60)) }
{% endif %}
[gcode_macro STOP_HEATING]
description: Stop manual preheat and restore the configured idle timeout
gcode:
{% set print_state = printer.print_stats.state|string|lower %}
{% if print_state in ["printing", "paused"] %}
{ action_raise_error("STOP_HEATING is only for manual preheat; use print controls during a print") }
{% else %}
TURN_OFF_HEATERS
SET_FAN_SPEED FAN=nevermore SPEED=0
SET_FAN_SPEED FAN=front SPEED=0
M107
SET_IDLE_TIMEOUT TIMEOUT={printer.configfile.settings.idle_timeout.timeout|int}
STATUS_READY
{ action_respond_info("Manual preheat stopped; heaters and preheat fans are off") }
{% endif %}
[gcode_macro nvmOn]
gcode:
SET_FAN_SPEED FAN=nevermore SPEED=1
[gcode_macro nvmOff]
gcode:
SET_FAN_SPEED FAN=nevermore SPEED=0
[gcode_macro PARK]
gcode:
{% set th = printer.toolhead %}
G0 X{th.axis_maximum.x//2} Y{th.axis_maximum.y//2} Z30
[gcode_macro G32]
gcode:
SAVE_GCODE_STATE NAME=STATE_G32
G90
G28
QUAD_GANTRY_LEVEL
G28
PARK
RESTORE_GCODE_STATE NAME=STATE_G32
[gcode_macro PRINT_START]
# Use PRINT_START for the slicer starting script - please customise for your slicer of choice
gcode:
# Parameters
{% set bedtemp = params.BED|int %}
{% set hotendtemp = params.EXTRUDER|int %}
{% set chambertemp = params.CHAMBER|default(0)|int %}
# Start every print from absolute positioning and no stale babystep offset.
G90
SET_GCODE_OFFSET Z=0
SET_FAN_SPEED FAN=front SPEED=0.55
STATUS_HOMING
G28
# Soften residue while the bed heats; Touch is limited to at most 150 C.
M104 S150
STATUS_HEATING
M190 S{bedtemp}
; wait for bed temp
{% if bedtemp > 95 %}
nvmOn
#TEMPERATURE_WAIT SENSOR="temperature_fan chamber" MINIMUM={chambertemp} ; wait for chamber temp
{% endif %}
STATUS_MESHING
QUAD_GANTRY_LEVEL
M109 S150
CLEAN_NOZZLE
CARTOGRAPHER_TOUCH_HOME
# Touch establishes the true Z origin before the fresh per-print scan mesh.
BED_MESH_CALIBRATE
M109 S{hotendtemp}
{% set FL_SIZE = params.SIZE|default("0_0_0_0")|string %}
; move nozzle away from bed
#LINE_PURGE
[gcode_macro PRINT_END]
# Use PRINT_END for the slicer ending script - please customise for your slicer of choice
gcode:
# safe anti-stringing move coords
{% set th = printer.toolhead %}
{% set x_safe = th.position.x + 20 * (1 if th.axis_maximum.x - th.position.x > 20 else -1) %}
{% set y_safe = th.position.y + 20 * (1 if th.axis_maximum.y - th.position.y > 20 else -1) %}
{% set z_safe = [th.position.z + 2, th.axis_maximum.z]|min %}
SAVE_GCODE_STATE NAME=STATE_PRINT_END
M400 ; wait for buffer to clear
G92 E0 ; zero the extruder
G1 E-8.0 F1800 ; retract filament
# STATUS_CLEANING
# clean_nozzle
TURN_OFF_HEATERS
nvmOff
SET_FAN_SPEED FAN=front SPEED=0
G90 ; absolute positioning
G0 X{x_safe} Y{y_safe} Z{z_safe} F20000 ; move nozzle to remove stringing
G0 X{th.axis_maximum.x//2} Y{th.axis_maximum.y - 2} F3600 ; park nozzle at rear
M107 ; turn off fan
BED_MESH_CLEAR
# The purpose of the SAVE_GCODE_STATE/RESTORE_GCODE_STATE
# command pair is to restore the printer's coordinate system
# and speed settings since the commands above change them.
# However, to prevent any accidental, unintentional toolhead
# moves when restoring the state, explicitly set MOVE=0.
RESTORE_GCODE_STATE NAME=STATE_PRINT_END MOVE=0
# Home, get position, throw around toolhead, home again.
# If MCU stepper positions (first line in GET_POSITION) are greater than a full step different (your number of microsteps), then skipping occured.
# We only measure to a full step to accomodate for endstop variance.
# Example: TEST_SPEED SPEED=300 ACCEL=5000 ITERATIONS=10
[gcode_macro TEST_SPEED]
description: Motion test; blocked until homing and sensorless X are physically validated
gcode:
# Speed
{% set speed = params.SPEED|default(printer.configfile.settings.printer.max_velocity)|int %}
# Iterations
{% set iterations = params.ITERATIONS|default(5)|int %}
# Acceleration
{% set accel = params.ACCEL|default(printer.configfile.settings.printer.max_accel)|int %}
# Bounding inset for large pattern (helps prevent slamming the toolhead into the sides after small skips, and helps to account for machines with imperfectly set dimensions)
{% set bound = params.BOUND|default(20)|int %}
# Size for small pattern box
{% set smallpatternsize = params.SMALLPATTERNSIZE|default(20)|int %}
# Large pattern
# Max positions, inset by BOUND
{% set x_min = printer.toolhead.axis_minimum.x + bound %}
{% set x_max = printer.toolhead.axis_maximum.x - bound %}
{% set y_min = printer.toolhead.axis_minimum.y + bound %}
{% set y_max = printer.toolhead.axis_maximum.y - bound %}
# Small pattern at center
# Find X/Y center point
{% set x_center = (printer.toolhead.axis_minimum.x|float + printer.toolhead.axis_maximum.x|float ) / 2 %}
{% set y_center = (printer.toolhead.axis_minimum.y|float + printer.toolhead.axis_maximum.y|float ) / 2 %}
# Set small pattern box around center point
{% set x_center_min = x_center - (smallpatternsize/2) %}
{% set x_center_max = x_center + (smallpatternsize/2) %}
{% set y_center_min = y_center - (smallpatternsize/2) %}
{% set y_center_max = y_center + (smallpatternsize/2) %}
# Save current gcode state (absolute/relative, etc)
SAVE_GCODE_STATE NAME=TEST_SPEED
# Output parameters to g-code terminal
{ action_respond_info("TEST_SPEED: starting %d iterations at speed %d, accel %d" % (iterations, speed, accel)) }
# Home and get position for comparison later:
M400 # Finish moves - https://github.com/AndrewEllis93/Print-Tuning-Guide/issues/66
G28
# QGL if not already QGLd (only if QGL section exists in config)
{% if printer.configfile.settings.quad_gantry_level %}
{% if printer.quad_gantry_level.applied == False %}
QUAD_GANTRY_LEVEL
G28 Z
{% endif %}
{% endif %}
# Move 50mm away from max position and home again (to help with hall effect endstop accuracy - https://github.com/AndrewEllis93/Print-Tuning-Guide/issues/24)
G90
G1 X{printer.toolhead.axis_maximum.x-50} Y{printer.toolhead.axis_maximum.y-50} F{30*60}
M400 # Finish moves - https://github.com/AndrewEllis93/Print-Tuning-Guide/issues/66
G28 X Y
G0 X{printer.toolhead.axis_maximum.x-1} Y{printer.toolhead.axis_maximum.y-1} F{30*60}
G4 P1000
GET_POSITION
# Go to starting position
G0 X{x_min} Y{y_min} Z{bound + 10} F{speed*60}
# Set new limits
SET_VELOCITY_LIMIT VELOCITY={speed} ACCEL={accel} MINIMUM_CRUISE_RATIO=0.5
{% for i in range(iterations) %}
# Large pattern diagonals
G0 X{x_min} Y{y_min} F{speed*60}
G0 X{x_max} Y{y_max} F{speed*60}
G0 X{x_min} Y{y_min} F{speed*60}
G0 X{x_max} Y{y_min} F{speed*60}
G0 X{x_min} Y{y_max} F{speed*60}
G0 X{x_max} Y{y_min} F{speed*60}
# Large pattern box
G0 X{x_min} Y{y_min} F{speed*60}
G0 X{x_min} Y{y_max} F{speed*60}
G0 X{x_max} Y{y_max} F{speed*60}
G0 X{x_max} Y{y_min} F{speed*60}
# Small pattern diagonals
G0 X{x_center_min} Y{y_center_min} F{speed*60}
G0 X{x_center_max} Y{y_center_max} F{speed*60}
G0 X{x_center_min} Y{y_center_min} F{speed*60}
G0 X{x_center_max} Y{y_center_min} F{speed*60}
G0 X{x_center_min} Y{y_center_max} F{speed*60}
G0 X{x_center_max} Y{y_center_min} F{speed*60}
# Small patternbox
G0 X{x_center_min} Y{y_center_min} F{speed*60}
G0 X{x_center_min} Y{y_center_max} F{speed*60}
G0 X{x_center_max} Y{y_center_max} F{speed*60}
G0 X{x_center_max} Y{y_center_min} F{speed*60}
{% endfor %}
# Restore max speed/accel/minimum_cruise_ratio to their configured values
SET_VELOCITY_LIMIT VELOCITY={printer.configfile.settings.printer.max_velocity} ACCEL={printer.configfile.settings.printer.max_accel} MINIMUM_CRUISE_RATIO={printer.configfile.settings.printer.minimum_cruise_ratio}
# Re-home and get position again for comparison:
M400 # Finish moves - https://github.com/AndrewEllis93/Print-Tuning-Guide/issues/66
G28 # This is a full G28 to fix an issue with CoreXZ - https://github.com/AndrewEllis93/Print-Tuning-Guide/issues/12
# Go to XY home positions (in case your homing override leaves it elsewhere)
G90
G0 X{printer.toolhead.axis_maximum.x-1} Y{printer.toolhead.axis_maximum.y-1} F{30*60}
G4 P1000
GET_POSITION
# Restore previous gcode state (absolute/relative, etc)
RESTORE_GCODE_STATE NAME=TEST_SPEED
# Unsafe experimental CLEAN_NOZZLE_TEST was removed. The physical brush
# positions in CLEAN_NOZZLE still require operator validation before use.
[gcode_macro CLEAN_NOZZLE]
variable_start_x: 110
variable_start_y: 250.5
variable_start_z: 0.3
variable_wipe_dist: -45
variable_wipe_qty: 10
variable_wipe_spd: 400
variable_raise_distance: 15
gcode:
{% if "xyz" not in printer.toolhead.homed_axes %}
G28
{% endif %}
G90 ; absolute positioning
## Move nozzle to start position
G1 X{start_x} Y{start_y} F6000
G1 Z{start_z} F1500
## Wipe nozzle
{% for wipes in range(1, (wipe_qty + 1)) %}
G1 X{start_x + wipe_dist} F{wipe_spd * 60}
G1 X{start_x} F{wipe_spd * 60}
{% endfor %}
## Raise nozzle
G1 Z{raise_distance}
[gcode_macro PAUSE]
rename_existing: BASE_PAUSE
gcode:
# Parameters
{% set z = params.Z|default(10)|int %} ; z hop amount
{% if printer['pause_resume'].is_paused|int == 0 %}
SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=zhop VALUE={z} ; set z hop variable for reference in resume macro
SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=etemp VALUE={printer['extruder'].target} ; set hotend temp variable for reference in resume macro
SET_FILAMENT_SENSOR SENSOR=encoder_sensor ENABLE=0 ; disable filament sensor
SAVE_GCODE_STATE NAME=PAUSE ; save current print position for resume
BASE_PAUSE ; pause print
{% if (printer.gcode_move.position.z + z) < printer.toolhead.axis_maximum.z %} ; check that zhop doesn't exceed z max
G91 ; relative positioning
G1 Z{z} F900 ; raise Z up by z hop amount
{% else %}
{ action_respond_info("Pause zhop exceeds maximum Z height.") } ; if z max is exceeded, show message and set zhop value for resume to 0
SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=zhop VALUE=0
{% endif %}
G90 ; absolute positioning
G1 X{printer.toolhead.axis_maximum.x/2} Y{printer.toolhead.axis_minimum.y+5} F6000 ; park toolhead at front center
SAVE_GCODE_STATE NAME=PAUSEPARK ; save parked position in case toolhead is moved during the pause (otherwise the return zhop can error)
M104 S0 ; turn off hotend
SET_IDLE_TIMEOUT TIMEOUT=43200 ; set timeout to 12 hours
{% endif %}
# LINE_PURGE is provided by KAMP/Line_Purge.cfg via KAMP_Settings.cfg.
# Keep a single definition; its parameters live in _KAMP_Settings.
[gcode_macro RESUME]
rename_existing: BASE_RESUME
variable_zhop: 0
variable_etemp: 0
gcode:
# Parameters
{% set e = params.E|default(2.5)|int %} ; hotend prime amount (in mm)
{% if printer['pause_resume'].is_paused|int == 1 %}
SET_FILAMENT_SENSOR SENSOR=encoder_sensor ENABLE=1 ; enable filament sensor
#INITIAL_RGB ; reset LCD color
SET_IDLE_TIMEOUT TIMEOUT={printer.configfile.settings.idle_timeout.timeout} ; set timeout back to configured value
{% if etemp > 0 %}
M109 S{etemp|int} ; wait for hotend to heat back up
{% endif %}
RESTORE_GCODE_STATE NAME=PAUSEPARK MOVE=1 MOVE_SPEED=100 ; go back to parked position in case toolhead was moved during pause (otherwise the return zhop can error)
G91 ; relative positioning
M83 ; relative extruder positioning
{% if printer[printer.toolhead.extruder].temperature >= printer.configfile.settings.extruder.min_extrude_temp %}
G1 Z{zhop * -1} E{e} F900 ; prime nozzle by E, lower Z back down
{% else %}
G1 Z{zhop * -1} F900 ; lower Z back down without priming (just in case we are testing the macro with cold hotend)
{% endif %}
RESTORE_GCODE_STATE NAME=PAUSE MOVE=1 MOVE_SPEED=60 ; restore position
BASE_RESUME ; resume print
{% endif %}
#*# <---------------------- SAVE_CONFIG ---------------------->
#*# DO NOT EDIT THIS BLOCK OR BELOW. The contents are auto-generated.
#*#
#*# [bed_mesh default]
#*# version = 1
#*# points =
#*# 0.073532, 0.073532, 0.070574, 0.070512, 0.067493, 0.064465, 0.064465, 0.061440, 0.058433, 0.056944, 0.058404, 0.058461, 0.056913, 0.058433, 0.064465, 0.067550, 0.070512, 0.072053, 0.073532, 0.079555, 0.079555, 0.078052, 0.081032, 0.079555, 0.076549, 0.076549, 0.075040, 0.073532, 0.073595, 0.073532
#*# 0.061440, 0.058433, 0.056944, 0.055396, 0.055428, 0.052385, 0.050861, 0.046322, 0.046293, 0.043295, 0.043268, 0.041741, 0.043238, 0.046350, 0.049338, 0.052385, 0.055428, 0.061440, 0.059950, 0.063012, 0.064497, 0.064465, 0.064528, 0.064497, 0.061440, 0.061497, 0.061440, 0.061468, 0.061440, 0.058404
#*# 0.058461, 0.055428, 0.053875, 0.052385, 0.050861, 0.049338, 0.046293, 0.040215, 0.038683, 0.037123, 0.037123, 0.035622, 0.037152, 0.037181, 0.043238, 0.046322, 0.046293, 0.052385, 0.055428, 0.055428, 0.053878, 0.055428, 0.058461, 0.056916, 0.056944, 0.055365, 0.052385, 0.050861, 0.049338, 0.049338
#*# 0.049338, 0.046293, 0.043295, 0.040186, 0.037123, 0.035651, 0.034092, 0.031051, 0.027977, 0.026415, 0.027977, 0.026441, 0.027926, 0.027977, 0.032586, 0.034063, 0.040186, 0.040186, 0.040215, 0.044794, 0.043238, 0.043238, 0.046293, 0.046293, 0.046293, 0.043238, 0.041741, 0.043238, 0.041712, 0.037181
#*# 0.046293, 0.043295, 0.040186, 0.040215, 0.038683, 0.034121, 0.031051, 0.027977, 0.024905, 0.021823, 0.021823, 0.021823, 0.024905, 0.023364, 0.024905, 0.031051, 0.032557, 0.037152, 0.040186, 0.040186, 0.040186, 0.041712, 0.043238, 0.043238, 0.041741, 0.040243, 0.037123, 0.034063, 0.031051, 0.031051
#*# 0.034063, 0.031051, 0.027977, 0.026441, 0.024905, 0.018744, 0.015712, 0.014136, 0.012619, 0.012567, 0.009528, 0.011044, 0.012593, 0.012619, 0.015712, 0.020309, 0.024905, 0.027977, 0.024905, 0.027978, 0.029488, 0.027977, 0.031051, 0.031022, 0.029514, 0.027977, 0.024905, 0.024905, 0.021823, 0.015712
#*# 0.024905, 0.026441, 0.024900, 0.021823, 0.021823, 0.015654, 0.012593, 0.009528, 0.009470, 0.009528, 0.006375, 0.006426, 0.003327, 0.006426, 0.009499, 0.012567, 0.015712, 0.015654, 0.018744, 0.021852, 0.018795, 0.021823, 0.021852, 0.021852, 0.020284, 0.018744, 0.012619, 0.012593, 0.009499, 0.006426
#*# 0.021823, 0.018744, 0.018744, 0.015654, 0.011073, 0.009528, 0.006426, 0.003327, 0.003322, 0.001744, 0.000218, 0.000218, 0.000218, 0.000218, 0.003298, 0.006426, 0.009470, 0.012593, 0.011018, 0.012619, 0.009528, 0.012593, 0.012619, 0.009528, 0.012567, 0.011073, 0.006426, 0.006426, 0.003327, -0.002889
#*# 0.021823, 0.018744, 0.015654, 0.012619, 0.009528, 0.009528, 0.009528, 0.007951, 0.003327, 0.003327, 0.000270, 0.003327, 0.000218, 0.000218, 0.003327, 0.001747, 0.004877, 0.006426, 0.009528, 0.011044, 0.009497, 0.006426, 0.012619, 0.006426, 0.007977, 0.006426, 0.003327, 0.001747, -0.002889, -0.005954
#*# 0.015654, 0.009528, 0.009528, 0.007977, 0.003327, 0.003327, 0.003327, 0.003327, 0.000218, -0.002889, -0.002889, -0.002889, -0.004447, -0.002889, -0.002889, 0.000218, 0.000218, 0.000218, 0.000166, 0.006375, 0.003327, 0.004877, 0.003327, 0.003327, 0.001773, 0.000218, -0.002889, -0.005954, -0.009121, -0.012194
#*# 0.012619, 0.009528, 0.007951, 0.006375, 0.003327, 0.004822, 0.006426, 0.003327, 0.003327, 0.000218, -0.001310, -0.002889, -0.002837, -0.004422, -0.001335, -0.002889, -0.002889, 0.000218, 0.000244, 0.001773, 0.000218, -0.002889, 0.003327, 0.003327, -0.002889, -0.002889, -0.004447, -0.009121, -0.012194, -0.015369
#*# 0.009528, 0.006426, 0.001773, 0.003327, -0.002889, -0.001335, 0.000218, -0.002889, -0.005954, -0.006006, -0.005980, -0.009069, -0.006006, -0.007512, -0.007563, -0.009121, -0.009121, -0.004422, -0.005954, -0.005954, -0.005954, -0.007512, -0.006006, -0.005980, -0.006006, -0.009069, -0.010683, -0.015343, -0.015369, -0.021581
#*# 0.009528, 0.009528, 0.006426, 0.006426, 0.004851, 0.001773, 0.006426, 0.000218, 0.000218, -0.004447, -0.002837, -0.002889, -0.004447, -0.006006, -0.006006, -0.002889, -0.002863, 0.000218, -0.002837, 0.000218, -0.001335, -0.001335, 0.000218, -0.002889, -0.006006, -0.006006, -0.009121, -0.012246, -0.018496, -0.021581
#*# 0.009528, 0.009528, 0.003327, 0.003327, 0.003327, 0.000218, 0.000270, 0.000218, 0.000218, -0.001335, -0.002889, -0.002889, -0.002889, -0.002889, -0.002889, 0.000218, -0.002889, 0.000218, -0.001310, 0.000218, 0.000218, -0.001335, -0.002889, -0.002889, -0.002889, -0.006006, -0.010632, -0.012194, -0.018450, -0.021581
#*# 0.012567, 0.012619, 0.009528, 0.009528, 0.006426, 0.006426, 0.006426, 0.006426, 0.003327, 0.001773, 0.000218, -0.002889, 0.000218, -0.001335, 0.001747, 0.000218, 0.003327, 0.000218, 0.001773, 0.003327, 0.003327, -0.001335, 0.000192, 0.000218, -0.002837, -0.005954, -0.006006, -0.012194, -0.021581, -0.021633
#*# 0.009499, 0.007922, 0.006400, 0.004877, 0.003327, 0.003327, 0.003327, 0.000218, -0.002889, -0.002837, -0.004447, -0.002863, 0.000218, 0.000218, -0.002863, 0.000218, 0.003269, 0.003327, 0.000218, 0.000192, 0.000218, -0.002837, -0.002894, -0.004447, -0.002889, -0.009069, -0.010632, -0.013755, -0.021581, -0.029409
#*# 0.009528, 0.006426, 0.009470, 0.007977, 0.006426, 0.003269, 0.003327, 0.001773, -0.002889, -0.002889, -0.002889, -0.002889, -0.001335, 0.000218, 0.000218, 0.001773, 0.000218, 0.000218, 0.003269, 0.003327, 0.000244, -0.002889, -0.002889, -0.002889, -0.002863, -0.007563, -0.012246, -0.015317, -0.021581, -0.027861
#*# 0.006426, 0.006375, 0.004851, 0.000218, 0.000218, -0.004422, -0.002889, -0.002889, -0.006006, -0.009069, -0.007563, -0.006006, -0.006006, -0.002889, -0.004422, -0.002889, -0.002889, -0.001335, 0.001773, -0.002889, -0.006006, -0.006006, -0.006006, -0.009069, -0.009069, -0.012194, -0.015317, -0.018450, -0.024715, -0.031003
#*# 0.003327, 0.003327, 0.003269, 0.000218, -0.002863, -0.006006, -0.006006, -0.009069, -0.010683, -0.010657, -0.012194, -0.009069, -0.007563, -0.004422, -0.005954, -0.006006, -0.006006, -0.004422, -0.002889, 0.000218, -0.004447, -0.007563, -0.009121, -0.012246, -0.012220, -0.016883, -0.021581, -0.021633, -0.027808, -0.034157
#*# -0.005954, -0.006006, -0.007563, -0.012246, -0.015369, -0.018450, -0.018473, -0.021581, -0.021581, -0.021581, -0.021581, -0.020038, -0.015343, -0.015317, -0.015317, -0.018473, -0.013781, -0.009121, -0.009069, -0.012194, -0.015343, -0.018450, -0.018450, -0.021581, -0.023148, -0.024715, -0.031003, -0.031003, -0.037308, -0.046791
#*# -0.012246, -0.012194, -0.012246, -0.016883, -0.021581, -0.027808, -0.027834, -0.029432, -0.031003, -0.027861, -0.031003, -0.029432, -0.027861, -0.021581, -0.021581, -0.021581, -0.020015, -0.018450, -0.015317, -0.020015, -0.023174, -0.027861, -0.027861, -0.030981, -0.030981, -0.034157, -0.037308, -0.042019, -0.046745, -0.049912
#*# -0.015369, -0.018496, -0.021581, -0.024715, -0.029406, -0.034104, -0.034104, -0.034157, -0.035732, -0.037281, -0.037255, -0.037255, -0.032580, -0.030981, -0.027861, -0.027861, -0.026288, -0.026288, -0.024715, -0.027861, -0.031003, -0.030981, -0.031003, -0.034157, -0.037308, -0.037281, -0.043576, -0.046745, -0.049912, -0.062628
#*# -0.018496, -0.018450, -0.021581, -0.026288, -0.031003, -0.037255, -0.037308, -0.037308, -0.040440, -0.040417, -0.040417, -0.045183, -0.042019, -0.037308, -0.030958, -0.032580, -0.034104, -0.029409, -0.031003, -0.034157, -0.034104, -0.035706, -0.037255, -0.037308, -0.037281, -0.040440, -0.046745, -0.053083, -0.053083, -0.062582
#*# -0.021581, -0.024715, -0.027861, -0.032531, -0.037281, -0.043576, -0.043576, -0.046745, -0.048329, -0.046745, -0.049912, -0.054674, -0.048329, -0.043576, -0.037255, -0.038885, -0.037281, -0.037255, -0.037308, -0.037281, -0.038859, -0.040417, -0.040463, -0.043576, -0.043602, -0.045183, -0.049912, -0.056265, -0.059398, -0.068968
#*# -0.024715, -0.026288, -0.029432, -0.034131, -0.037255, -0.043576, -0.046745, -0.049935, -0.049912, -0.053083, -0.053060, -0.056265, -0.056212, -0.049912, -0.042022, -0.042022, -0.043576, -0.043576, -0.043576, -0.043602, -0.043576, -0.043628, -0.045160, -0.046745, -0.046791, -0.049912, -0.053037, -0.059398, -0.065800, -0.070589
#*# -0.027861, -0.031003, -0.034157, -0.037255, -0.043602, -0.049912, -0.049912, -0.053083, -0.056212, -0.051498, -0.059422, -0.062582, -0.053083, -0.049912, -0.048352, -0.049912, -0.046745, -0.046768, -0.046745, -0.043576, -0.046745, -0.049889, -0.045160, -0.046745, -0.049912, -0.053037, -0.061037, -0.065776, -0.068968, -0.075371
#*# -0.024715, -0.024715, -0.027861, -0.034104, -0.038862, -0.045187, -0.046745, -0.046745, -0.053083, -0.053083, -0.059398, -0.062628, -0.059445, -0.051498, -0.049935, -0.049912, -0.049912, -0.049935, -0.049912, -0.049912, -0.049912, -0.049912, -0.049912, -0.053083, -0.053083, -0.057855, -0.062628, -0.065823, -0.072164, -0.075371
#*# -0.018450, -0.027861, -0.030958, -0.037255, -0.042045, -0.045160, -0.049912, -0.056265, -0.054674, -0.054625, -0.059445, -0.059445, -0.059398, -0.057855, -0.056265, -0.056212, -0.051498, -0.049912, -0.053083, -0.049912, -0.053083, -0.054674, -0.053083, -0.056212, -0.057805, -0.059398, -0.065776, -0.065823, -0.072164, -0.075371
#*# -0.015317, -0.012246, -0.021581, -0.027861, -0.034157, -0.040463, -0.043602, -0.046745, -0.049912, -0.053083, -0.054674, -0.059445, -0.056265, -0.054648, -0.054648, -0.056265, -0.056212, -0.053060, -0.051498, -0.053083, -0.056265, -0.054648, -0.053060, -0.051498, -0.053083, -0.059398, -0.062605, -0.064226, -0.068968, -0.068968
#*# -0.006006, -0.009121, -0.013781, -0.021581, -0.030958, -0.034157, -0.038862, -0.043576, -0.043628, -0.046745, -0.049935, -0.049912, -0.049912, -0.049912, -0.049912, -0.049912, -0.046745, -0.043576, -0.045160, -0.048329, -0.046745, -0.046791, -0.046768, -0.049912, -0.049912, -0.053083, -0.057855, -0.057805, -0.059445, -0.065823
#*# x_count = 30
#*# y_count = 30
#*# mesh_x_pps = 0
#*# mesh_y_pps = 0
#*# algo = bicubic
#*# tension = 0.2
#*# min_x = 35.0
#*# max_x = 215.0
#*# min_y = 30.0
#*# max_y = 200.0
#*#
#*# [extruder]
#*# control = pid
#*# pid_kp = 26.908
#*# pid_ki = 2.360
#*# pid_kd = 76.690
#*#
#*# [input_shaper]
#*# shaper_type_x = mzv
#*# shaper_freq_x = 60.8
#*# shaper_type_y = mzv
#*# shaper_freq_y = 43.4
#*#
#*# [cartographer scan_model default]
#*# coefficients = 1.5077021654307656,1.982925374522947,0.8069624702177761,0.44075023484388876,0.5125827502492211,0.2069086470851544,-0.3443498114430992,-0.00819725951495316,0.31856943991554365,0.08027243835900834
#*# domain = 3.238062151773355e-07,3.3502316466550964e-07
#*# z_offset = 0
#*# reference_temperature = 29.33
#*# software_version = 1.9.0
#*# mcu_version = CARTOGRAPHER V3 6.1.0
#*#
#*# [cartographer touch_model default]
#*# threshold = 1045
#*# speed = 2
#*# z_offset = -0.05
#*# software_version = 1.9.0
#*# mcu_version = CARTOGRAPHER V3 6.1.0
printer_data/config/pre-fix-20260907-1955/stealthburner_leds.cfg
-279
View File
@@ -1,279 +0,0 @@
# Macros for setting the status leds on the Voron StealthBurner toolhead (or for any neopixel-type leds).
#
# You will need to configure a neopixel (or other addressable led, such as dotstar). See
# https://www.klipper3d.org/Config_Reference.html#neopixel for configuration details.
#####################################
# INSTRUCTIONS #
#####################################
# How to use all this stuff:
#
# 1. Copy this .cfg file into your Klipper config directory and then add [include stealthburner_leds.cfg]
# to the top of your printer.cfg in order to register the LEDs and macros with Klipper.
# 2. Define your LEDs by editing [neopixel sb_leds] below and entering the data pin from your control board
# as well as the color order.
#
# Note: RGB and RGBW are different and must be defined explicitly. RGB and RGBW are also not able to
# be mix-and-matched in the same chain. A separate data line would be needed for proper functioning.
#
# RGBW LEDs will have a visible yellow-ish phosphor section to the chip. If your LEDs do not have
# this yellow portion, you have RGB LEDs.
#
# 3. Save your config and restart Klipper.
#
# Note: We set RED and BLUE to 1.0 to make it easier for users and supporters to detect
# misconfigurations or miswiring. The default color format is for Neopixels with a dedicated
# white LED. On startup, all three SB LEDs should light up.
#
# If you get random colors across your LEDs, change the color_order to GRB and restart. Then
# omit the W for each suggested color_order in the next paragraph.
#
# If you get MAGENTA, your color order is correct. If you get CYAN, you need to use RGBW. If
# you get YELLOW, you need to use BRGW (note that BRG is only supported in the latest Klipper
# version).
#
# 4. Once you have confirmed that the LEDs are set up correctly, you must now decide where you want
# these macros called up...which means adding them to your existing gcode macros. NOTHING will happen
# unless you add the STATUS_????? macros to your existing gcode macros.
#
# Example: add STATUS_LEVELING to the beginning of your QGL gcode macro, and then add STATUS_READY
# to the end of it to set the logo LED and nozzle LEDs back to the `ready` state.
#
# Example: add STATUS_CLEANING to the beginning of your nozzle-cleaning macro, and then STATUS_READY
# to the end of it to return the LEDs back to `ready` state.
#
# 5. Feel free to change colors of each macro, create new ones if you have a need to. The macros provided below
# are just an example of what is possible. If you want to try some more complex animations, you will most
# likely have to use WLED with Moonraker and a small micro-controller
#
#####################################
# END INSTRUCTRUCTIONS #
#####################################
[led my_led]
white_pin: PB10
# The pin controlling the given LED color. At least one of the above
# parameters must be provided.
cycle_time: 0.010
# The amount of time (in seconds) per PWM cycle. It is recommended
# this be 10 milliseconds or greater when using software based PWM.
# The default is 0.010 seconds.
#hardware_pwm: False
# Enable this to use hardware PWM instead of software PWM. When
# using hardware PWM the actual cycle time is constrained by the
# implementation and may be significantly different than the
# requested cycle_time. The default is False.
#initial_RED: 0.0
#initial_GREEN: 0.0
#initial_BLUE: 0.0
initial_WHITE: 1.0
# Sets the initial LED color. Each value should be between 0.0 and
# 1.0. The default for each color is 0.
[neopixel leds_light]
pin: PB0
# The pin connected to the neopixel. This parameter must be provided.
chain_count: 55
# The number of Neopixel chips that are "daisy chained" to the
# provided pin. The default is 1 (which indicates only a single
# Neopixel is connected to the pin).
color_order: GRB
# Set the pixel order required by the LED hardware. Options are GRB,
# RGB, GRBW, or RGBW. The default is GRB.
initial_RED: 1.0
initial_GREEN: 1.0
initial_BLUE: 1.0
initial_WHITE: 0.0
# Sets the initial LED color of the Neopixel. Each value should be
# between 0.0 and 1.0. The WHITE option is only available on RGBW
# LEDs. The default for each color is 0.#
# Most configuration for the macros can be done by modifying the variables in the _sb_vars macro
# at the start of this file.
[neopixel sb_leds]
pin: EBBCan:PD3
chain_count: 6
##########
# MACROS #
##########
# The following status macros are available (these go inside of your macros):
#
# STATUS_READY
# STATUS_OFF
# STATUS_BUSY
# STATUS_HEATING
# STATUS_LEVELING
# STATUS_HOMING
# STATUS_CLEANING
# STATUS_MESHING
# STATUS_CALIBRATING_Z
#
# With additional macros for basic control:
#
# SET_NOZZLE_LEDS_ON
# SET_LOGO_LEDS_OFF
# SET_NOZZLE_LEDS_OFF
#
# Contributed by Voron discord users wile.e, Tetsunosuke, and etherwalker
[gcode_macro _sb_vars]
# User settings for the StealthBurner status leds. You can change the status colors and led
# configurations for the logo and nozzle here.
variable_colors: {
'logo': { # Colors for logo states
'busy': {'r': 0.4, 'g': 0.0, 'b': 0.0, 'w': 0.0},
'cleaning': {'r': 0.0, 'g': 0.02, 'b': 0.5, 'w': 0.0},
'calibrating_z': {'r': 0.8, 'g': 0., 'b': 0.35, 'w': 0.0},
'heating': {'r': 0.3, 'g': 0.18, 'b': 0.0, 'w': 0.0},
'homing': {'r': 0.0, 'g': 0.6, 'b': 0.2, 'w': 0.0},
'leveling': {'r': 0.5, 'g': 0.1, 'b': 0.4, 'w': 0.0},
'meshing': {'r': 0.2, 'g': 1.0, 'b': 0.0, 'w': 0.0},
'off': {'r': 0.0, 'g': 0.0, 'b': 0.0, 'w': 0.0},
'printing': {'r': 1.0, 'g': 0.0, 'b': 0.0, 'w': 0.0},
'standby': {'r': 0.01, 'g': 0.01, 'b': 0.01, 'w': 0.1},
},
'nozzle': { # Colors for nozzle states
'heating': {'r': 0.8, 'g': 0.35, 'b': 0.0, 'w':0.0},
'off': {'r': 0.0, 'g': 0.0, 'b': 0.0, 'w': 0.0},
'on': {'r': 0.8, 'g': 0.8, 'b': 0.8, 'w':1.0},
'standby': {'r': 0.6, 'g': 0.0, 'b': 0.0, 'w':0.0},
},
'thermal': {
'hot': {'r': 1.0, 'g': 0.0, 'b': 0.0, 'w': 0.0},
'cold': {'r': 0.3, 'g': 0.0, 'b': 0.3, 'w': 0.0}
}
}
variable_logo_led_name: "sb_leds"
# The name of the addressable LED chain that contains the logo LED(s)
variable_logo_idx: "1"
# A comma-separated list of indexes LEDs in the logo
variable_nozzle_led_name: "sb_leds"
# The name of the addressable LED chain that contains the nozzle LED(s). This will
# typically be the same LED chain as the logo.
variable_nozzle_idx: "2,3"
# A comma-separated list of indexes of LEDs in the nozzle
gcode:
# This section is required. Do Not Delete.
[gcode_macro _set_sb_leds]
gcode:
{% set red = params.RED|default(0)|float %}
{% set green = params.GREEN|default(0)|float %}
{% set blue = params.BLUE|default(0)|float %}
{% set white = params.WHITE|default(0)|float %}
{% set led = params.LED|string %}
{% set idx = (params.IDX|string).split(',') %}
{% set transmit_last = params.TRANSMIT|default(1) %}
{% for led_index in idx %}
{% set transmit=transmit_last if loop.last else 0 %}
set_led led={led} red={red} green={green} blue={blue} white={white} index={led_index} transmit={transmit}
{% endfor %}
[gcode_macro _set_sb_leds_by_name]
gcode:
{% set leds_name = params.LEDS %}
{% set color_name = params.COLOR %}
{% set color = printer["gcode_macro _sb_vars"].colors[leds_name][color_name] %}
{% set led = printer["gcode_macro _sb_vars"][leds_name + "_led_name"] %}
{% set idx = printer["gcode_macro _sb_vars"][leds_name + "_idx"] %}
{% set transmit = params.TRANSMIT|default(1) %}
_set_sb_leds led={led} red={color.r} green={color.g} blue={color.b} white={color.w} idx="{idx}" transmit={transmit}
[gcode_macro _set_logo_leds]
gcode:
{% set red = params.RED|default(0)|float %}
{% set green = params.GREEN|default(0)|float %}
{% set blue = params.BLUE|default(0)|float %}
{% set white = params.WHITE|default(0)|float %}
{% set led = printer["gcode_macro _sb_vars"].logo_led_name %}
{% set idx = printer["gcode_macro _sb_vars"].logo_idx %}
{% set transmit=params.TRANSMIT|default(1) %}
_set_sb_leds led={led} red={red} green={green} blue={blue} white={white} idx="{idx}" transmit={transmit}
[gcode_macro _set_nozzle_leds]
gcode:
{% set red = params.RED|default(0)|float %}
{% set green = params.GREEN|default(0)|float %}
{% set blue = params.BLUE|default(0)|float %}
{% set white = params.WHITE|default(0)|float %}
{% set led = printer["gcode_macro _sb_vars"].nozzle_led_name %}
{% set idx = printer["gcode_macro _sb_vars"].nozzle_idx %}
{% set transmit=params.TRANSMIT|default(1) %}
_set_sb_leds led={led} red={red} green={green} blue={blue} white={white} idx="{idx}" transmit={transmit}
[gcode_macro set_logo_leds_off]
gcode:
{% set transmit=params.TRANSMIT|default(1) %}
_set_logo_leds red=0 blue=0 green=0 white=0 transmit={transmit}
[gcode_macro set_nozzle_leds_on]
gcode:
{% set transmit=params.TRANSMIT|default(1) %}
_set_sb_leds_by_name leds="nozzle" color="on" transmit={transmit}
[gcode_macro set_nozzle_leds_off]
gcode:
{% set transmit=params.TRANSMIT|default(1) %}
_set_sb_leds_by_name leds="nozzle" color="off" transmit={transmit}
[gcode_macro status_off]
gcode:
set_logo_leds_off transmit=0
set_nozzle_leds_off
[gcode_macro status_ready]
gcode:
_set_sb_leds_by_name leds="logo" color="standby" transmit=0
_set_sb_leds_by_name leds="nozzle" color="standby" transmit=1
[gcode_macro status_busy]
gcode:
_set_sb_leds_by_name leds="logo" color="busy" transmit=0
set_nozzle_leds_on
[gcode_macro status_heating]
gcode:
_set_sb_leds_by_name leds="logo" color="heating" transmit=0
_set_sb_leds_by_name leds="nozzle" color="heating" transmit=1
[gcode_macro status_leveling]
gcode:
_set_sb_leds_by_name leds="logo" color="leveling" transmit=0
set_nozzle_leds_on
[gcode_macro status_homing]
gcode:
_set_sb_leds_by_name leds="logo" color="homing" transmit=0
set_nozzle_leds_on
[gcode_macro status_cleaning]
gcode:
_set_sb_leds_by_name leds="logo" color="cleaning" transmit=0
set_nozzle_leds_on
[gcode_macro status_meshing]
gcode:
_set_sb_leds_by_name leds="logo" color="meshing" transmit=0
set_nozzle_leds_on
[gcode_macro status_calibrating_z]
gcode:
_set_sb_leds_by_name leds="logo" color="calibrating_z" transmit=0
set_nozzle_leds_on
[gcode_macro status_printing]
gcode:
_set_sb_leds_by_name leds="logo" color="printing" transmit=0
set_nozzle_leds_on