diff --git a/printer_data/config/printer.cfg b/printer_data/config/printer.cfg
index 69cda32..a96ac8e 100644
--- a/printer_data/config/printer.cfg
+++ b/printer_data/config/printer.cfg
@@ -150,7 +150,7 @@ enable_pin: !PG5
 rotation_distance: 40
 gear_ratio: 80:16
 microsteps: 32
-endstop_pin: ^!ar1
+endstop_pin: probe:z_virtual_endstop
 ##  Z-position of nozzle (in mm) to z-endstop trigger point relative to print surface (Z0)
 ##  (+) value = endstop above Z0, (-) value = endstop below
 ##  Increasing position_endstop brings nozzle closer to the bed
@@ -322,15 +322,15 @@ pid_ki: 2.347
 pid_kd: 363.769
 
 
-[bed_mesh]
-zero_reference_position: 125, 125 # center of your bed
-speed: 400
-horizontal_move_z: 5
-mesh_min: 35, 30
-mesh_max: 215, 200
-probe_count: 10,10
-algorithm: bicubic
-adaptive_margin: 5
+# [bed_mesh]
+# zero_reference_position: 125, 125 # center of your bed
+# speed: 400
+# horizontal_move_z: 5
+# mesh_min: 35, 30
+# mesh_max: 215, 200
+# probe_count: 10,10
+# algorithm: bicubic
+# adaptive_margin: 5
 
 
 #####################################################################
@@ -427,20 +427,20 @@ z_hop:10
 ##  Min & Max gantry corners - measure from nozzle at MIN (0,0) and 
 ##  MAX (250, 250), (300,300), or (350,350) depending on your printer size
 ##  to respective belt positions
-[quad_gantry_level]
+# [quad_gantry_level]
 
-#--------------------------------------------------------------------
-##  Gantry Corners for 250mm Build
-##  Uncomment for 250mm build
-gantry_corners:
-   -60,-10 
-   310, 320
-##  Probe points
-points:
-   50,25
-   50,210
-   220,210
-   220,25
+# #--------------------------------------------------------------------
+# ##  Gantry Corners for 250mm Build
+# ##  Uncomment for 250mm build
+# gantry_corners:
+#    -60,-10 
+#    310, 320
+# ##  Probe points
+# points:
+#    50,25
+#    50,210
+#    220,210
+#    220,25
     
 ##  Gantry Corners for 300mm Build
 ##  Uncomment for 300mm build
@@ -467,11 +467,11 @@ points:
 #   300,25
 
 #--------------------------------------------------------------------
-speed: 300
-horizontal_move_z: 10
-retries: 5
-retry_tolerance: 0.0075
-max_adjust: 10
+# speed: 300
+# horizontal_move_z: 10
+# retries: 5
+# retry_tolerance: 0.0075
+# max_adjust: 10
 
 ########################################
 # EXP1 / EXP2 (display) pins