New Backup on boot - 19.08.2026 - 18:17:14

2026-08-19 18:17:34 +02:00
1 parent 8ba00ba259
commit 3491b2315b
@@ -0,0 +1,28 @@
+[mcu cartographer]
+
+canbus_uuid: fa54c42a161b
+
+
+[cartographer]
+mcu: cartographer            
+#   Offsets are measured from the centre of your coil, to the tip of your nozzle 
+#   on a level axis. It is vital that this is accurate. 
+x_offset: 0                          
+#    adjust for your cartographers offset from nozzle to middle of coil
+y_offset: 25                        
+#    adjust for your cartographers offset from nozzle to middle of coil
+
+[adxl345]
+cs_pin: cartographer:PA3
+spi_bus: spi1
+
+[resonance_tester]
+accel_chip: adxl345
+probe_points:
+    125, 125, 20
+
+[temperature_sensor Cartographer_MCU]
+sensor_type: temperature_mcu
+sensor_mcu: cartographer
+min_temp: 0
+max_temp: 105
@@ -0,0 +1,55 @@
+#### crowsnest.conf
+#### This is a typical default config.
+#### Also used as default in mainsail / MainsailOS
+#### See:
+#### https://github.com/mainsail-crew/crowsnest/blob/master/README.md
+#### for details to configure to your needs.
+
+
+#####################################################################
+####                                                            #####
+####      Information about ports and according URL's           #####
+####                                                            #####
+#####################################################################
+####                                                            #####
+####    Port 8080 equals /webcam/?action=[stream/snapshot]      #####
+####    Port 8081 equals /webcam2/?action=[stream/snapshot]     #####
+####    Port 8082 equals /webcam3/?action=[stream/snapshot]     #####
+####    Port 8083 equals /webcam4/?action=[stream/snapshot]     #####
+####                                                            #####
+#####################################################################
+
+
+[crowsnest]
+log_path: ~/printer_data/logs/crowsnest.log
+log_level: verbose                      # Valid Options are quiet/verbose/debug
+delete_log: false                       # Deletes log on every restart, if set to true
+
+[cam android]
+mode: mjpg                              # mjpg/rtsp
+port: 80                                # Port
+device: http://192.168.0.117:4747/video                     # See Log for available ...
+resolution: 640x480                     # widthxheight format
+max_fps: 15                             # If Hardware Supports this it will be forced, otherwise ignored/coerced.
+#custom_flags:                          # You can run the Stream Services with custom flags.
+#v4l2ctl:                               # Add v4l2-ctl parameters to setup your camera, see Log what your cam is capable of.
+
+[cam c930]
+mode: mjpg                              # mjpg/rtsp
+port: 8080                                # Port
+device: /dev/video0                 # See Log for available ...
+resolution: 1280x720               # widthxheight format
+max_fps: 30                             # If Hardware Supports this it will be forced, otherwise ignored/coerced.
+#custom_flags:                          # You can run the Stream Services with custom flags.
+#v4l2ctl:                               # Add v4l2-ctl parameters to setup your camera, see Log what your cam is capable of.
+
+[cam custom]
+mode: mjpg                              # mjpg/rtsp
+port: 8081                                # Port
+device: /dev/video2                 # See Log for available ...
+resolution: 1280x720               # widthxheight format
+max_fps: 30                             # If Hardware Supports this it will be forced, otherwise ignored/coerced.
+#custom_flags:                          # You can run the Stream Services with custom flags.
+#v4l2ctl:                               # Add v4l2-ctl parameters to setup your camera, see Log what your cam is capable of.
+
+