KlipperScreen.conf modified - 08.09.2026 - 04:17:35

2026-09-08 04:17:52 +02:00
1 parent 614effb32f
commit 4bdea24738
@@ -1,28 +0,0 @@
-[mcu cartographer]
-
-canbus_uuid: fa54c42a161b
-
-
-[cartographer]
-mcu: cartographer            
-#   Offsets are measured from the centre of your coil, to the tip of your nozzle 
-#   on a level axis. It is vital that this is accurate. 
-x_offset: 0                          
-#    adjust for your cartographers offset from nozzle to middle of coil
-y_offset: 25                        
-#    adjust for your cartographers offset from nozzle to middle of coil
-
-[adxl345]
-cs_pin: cartographer:PA3
-spi_bus: spi1
-
-[resonance_tester]
-accel_chip: adxl345
-probe_points:
-    125, 125, 20
-
-[temperature_sensor Cartographer_MCU]
-sensor_type: temperature_mcu
-sensor_mcu: cartographer
-min_temp: 0
-max_temp: 105
@@ -1,46 +0,0 @@
-#### crowsnest.conf
-#### This is a typical default config.
-#### Also used as default in mainsail / MainsailOS
-#### See:
-#### https://github.com/mainsail-crew/crowsnest/blob/master/README.md
-#### for details to configure to your needs.
-
-
-#####################################################################
-####                                                            #####
-####      Information about ports and according URL's           #####
-####                                                            #####
-#####################################################################
-####                                                            #####
-####    Port 8080 equals /webcam/?action=[stream/snapshot]      #####
-####    Port 8081 equals /webcam2/?action=[stream/snapshot]     #####
-####    Port 8082 equals /webcam3/?action=[stream/snapshot]     #####
-####    Port 8083 equals /webcam4/?action=[stream/snapshot]     #####
-####                                                            #####
-#####################################################################
-
-
-[crowsnest]
-log_path: ~/printer_data/logs/crowsnest.log
-log_level: verbose
-delete_log: true
-
-[cam chamber]
-mode: mjpg
-port: 8080
-device: /dev/v4l/by-id/usb-HZ_USB_Camera_20220301104-video-index0
-resolution: 1280x720
-max_fps: 30
-# Keep automatic brightness, but do not let long exposure silently lower the
-# configured frame rate when chamber lighting changes.
-v4l2ctl: power_line_frequency=1,auto_exposure=3,exposure_dynamic_framerate=0
-
-[cam c930e]
-mode: mjpg
-port: 8081
-device: /dev/v4l/by-id/usb-046d_Logitech_Webcam_C930e_CA4F3EDE-video-index0
-resolution: 1280x720
-max_fps: 30
-# 50 Hz avoids mains-light flicker. Fixed focus prevents the autofocus from
-# hunting when the toolhead crosses the centre of the frame.
-v4l2ctl: power_line_frequency=1,exposure_dynamic_framerate=0,focus_automatic_continuous=0,focus_absolute=0