mariusz.pacek/voron2.4-config
1
0 Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

printer.cfg modified - 07.09.2026 - 00:28:43

Browse Source
This commit is contained in:
klipper committed 2026-09-07 00:28:51 +02:00
1 parent 57e75125d5
commit 5d6450e4b5
3 files changed
+12 -38
Download Patch File Download Diff File Expand all files Collapse all files

No files matched your search

printer_data/config/ebb36.cfg
+5 -31
View File
@@ -1,38 +1,14 @@
# This file contains common pin mappings for the BIGTREETECH EBBCan
# Canbus board. To use this config, the firmware should be compiled for the
# RP2040 with "USB" or "CAN bus (on gpio4/gpio5)".
# The "EBB Can" micro-controller will be used to control the components on the nozzle.
# Active toolhead controller: BIGTREETECH EBB with STM32G0B1xx (PCB revision not confirmed).
# Runtime transport: CAN on PB0/PB1 at 1,000,000 bit/s; application starts at 0x08000000.
# No Katapult bootloader was detected. Do not use an RP2040 image or assume remote CAN flashing.
# The EBB micro-controller controls the toolhead components.
# See docs/Config_Reference.md for a description of parameters.
# [temperature_sensor EBB_NTC]
# sensor_type: Generic 3950
# sensor_pin: EBBCan:gpio28
# [adxl345]
# cs_pin: EBBCan:gpio1
# spi_software_sclk_pin: EBBCan:gpio2
# spi_software_mosi_pin: EBBCan:gpio0
# spi_software_miso_pin: EBBCan:gpio3
# axes_map: z,-y,x
# [resonance_tester]
# probe_points: 100, 100, 20
# accel_chip: adxl345
[mcu EBBCan]
canbus_uuid: 2bfe734774a0
# [adxl345]
# cs_pin: EBBCan: PB12
# spi_bus: spi2_PB2_PB11_PB10
# axes_map: x,y,z
# ADXL345 is provided by Cartographer; legacy EBB accelerometer examples stay removed.
[extruder]
## Update value below when you perform extruder calibration
@@ -85,5 +61,3 @@ heater: extruder
heater_temp: 50.0
max_power: 1.0
kick_start_time: 0.5
printer_data/config/moonraker.conf
+2 -2
View File
@@ -67,7 +67,7 @@ managed_services: klipper moonraker
type: git_repo
path: ~/KlipperScreen
origin: https://github.com/jordanruthe/KlipperScreen.git
env: ~/.KlipperScreen-env/bin/python
virtualenv: ~/.KlipperScreen-env
requirements: scripts/KlipperScreen-requirements.txt
install_script: scripts/KlipperScreen-install.sh
managed_services: KlipperScreen
@@ -105,4 +105,4 @@ type: git_repo
path: ~/klipper-backup
origin: https://github.com/Staubgeborener/klipper-backup.git
managed_services: moonraker
primary_branch: main
primary_branch: main
printer_data/config/printer.cfg
+5 -5
View File
@@ -1,13 +1,13 @@
# This file contains common pin mappings for the BigTreeTech Octopus V1.
# To use this config, the firmware should be compiled for the STM32F446 with a "32KiB bootloader"
# Enable "extra low-level configuration options" and select the "12MHz crystal" as clock reference
# Active mainboard: BigTreeTech Octopus family with STM32F407xx (PCB revision not confirmed).
# Firmware profile: 32KiB factory SD bootloader, 8MHz crystal, USB on PA11/PA12.
# Do not substitute the STM32F446/12MHz profile; runtime hardware was verified on 2026-09-06.
# after running "make", copy the generated "klipper/out/klipper.bin" file to a
# file named "firmware.bin" on an SD card and then restart the OctoPus with that SD card.
# file named "firmware.bin" on an SD card and then restart the Octopus with that SD card.
# See docs/Config_Reference.md for a description of parameters.
## Voron Design VORON2 250/300/350mm BigTreeTech OctoPus V1 TMC2209 UART config
## Voron Design VORON2 250mm; BigTreeTech Octopus-family STM32F407; TMC2209 UART.
## *** THINGS TO CHANGE/CHECK: ***
## MCU paths [mcu] section